Solved

V90 commands

Posted on 1999-01-25
3
375 Views
Last Modified: 2013-12-27
Where can I find complete at commands for V90 modem
(rockwell chipset) including fax, data and voice commands.
Example: I want my program to display CALLER ID when phone
rings and find whos number, in my diary it belongs to. Also i have some at+ms= like commands and I wolud like to know what they means
0
Comment
Question by:kvisko
  • 2
3 Comments
 

Author Comment

by:kvisko
ID: 1147755
Edited text of question
0
 
LVL 1

Accepted Solution

by:
jdornan earned 150 total points
ID: 1147756
http://www.digitan.com/faq/AT-V90.html

In V.34 modems if MNP10-EC is enabled manually (using AT-SEC=1) no particular modulation will be chosen, therefore if the user wishes to force V.32bis modulation they should use the AT+MS=10,1,minspeed,maxspeed command (e.g. AT+MS=10,1,4800,12000 would force V.32bis and limit the speed between 4800 and 12000 bps). To allow V.34 modulation use AT+MS=11,1,minspeed,maxspeed (e.g. AT+MS=11,1,4800,19200 would allow V.34 speeds between 4800 and 19200).
0
 

Author Comment

by:kvisko
ID: 1147757
Thanks for answer, but this is only a part of my question, I still want a list of commands (Caller Id receiving) and at+ms full syntax example at+ms=56,1,14400,1,0,33600 from your answer I'd newer come to this string which works for my modem.

I repeat - I want to find complete list of modem commands incl. voice, fax, at, at+ms, ALL of them. Adress where i can find it wil doo. Thanks jdownan, Your answer did give me something of what I needed
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
When posting a question about a Cisco ASA, Cisco Router or Cisco Switch, it can aid diagnosis if a suitably sanitised copy of the config is provided. It is much better to leave as much of the configuration as original as possible, as it could be tha…
This Micro Tutorial will give you a basic overview how to record your screen with Microsoft Expression Encoder. This program is still free and open for the public to download. This will be demonstrated using Microsoft Expression Encoder 4.
Finds all prime numbers in a range requested and places them in a public primes() array. I've demostrated a template size of 30 (2 * 3 * 5) but larger templates can be built such 210  (2 * 3 * 5 * 7) or 2310  (2 * 3 * 5 * 7 * 11). The larger templa…

773 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question