PPP to ISP

I am trying to make my connection to my ISP but I can't....

In windows the ISP DUN after connection... in details / protocols ..
TCP/IP
Password Authentication Protocol ...

so .. I think it uses PAP .. ok !!

with linuxconf i setup ppp0
with my ISP phone ... whiout PAP and
login/Password ...

I try to connect .. and i receive:
Nov 10 22:48:44 carlosv pppd[974]: pppd 2.3.7 started by root, uid 0
Nov 10 22:48:44 carlosv ifup-ppp: pppd started for ppp0 on /dev/ttyS2 at 115200
Nov 10 22:49:30 carlosv pppd[974]: Connect script failed
Nov 10 22:49:31 carlosv pppd[974]: Exit.

I delete ppp0 and setup it again ..
this time with PAP

and receive the next text:
Nov 10 22:50:50 carlosv ifup-ppp: pppd started for ppp0 on /dev/ttyS2 at 115200
Nov 10 22:50:50 carlosv pppd[1022]: pppd 2.3.7 started by root, uid 0
Nov 10 22:51:42 carlosv pppd[1022]: Serial connection established.
Nov 10 22:51:50 carlosv pppd[1022]: Using interface ppp0
Nov 10 22:51:50 carlosv pppd[1022]: Connect: ppp0 <--> /dev/ttyS2
Nov 10 22:51:51 carlosv pppd[1022]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x6d2be8ee> <pcomp> <accomp>]
Nov 10 22:52:18 carlosv last message repeated 9 times
Nov 10 22:52:21 carlosv pppd[1022]: LCP: timeout sending Config-Requests
Nov 10 22:52:21 carlosv pppd[1022]: Connection terminated.
Nov 10 22:52:21 carlosv pppd[1022]: Connect time 0.6 minutes.
Nov 10 22:52:21 carlosv pppd[1022]: Receive serial link is not 8-bit clean:
Nov 10 22:52:21 carlosv pppd[1022]: Problem: all had bit 7 set to 0
Nov 10 22:53:07 carlosv pppd[1022]: Exit.

It looks like I'm connected .. but a can't receive my IP and the dialout is closed..

ifconfig .. never show ppp0...
some help!!!
LVL 1
carlosvsAsked:
Who is Participating?
 
sirwnstnConnect With a Mentor Commented:
Check out this link:

http://axion.physics.ubc.ca/ppp-linux.txt

It's awesome.  Happy hacking.
0
All Courses

From novice to tech pro — start learning today.