[Webinar] Streamline your web hosting managementRegister Today

x
?
Solved

Davicom 33600 Modem Setup

Posted on 1999-12-13
2
Medium Priority
?
159 Views
Last Modified: 2013-12-15
I have internal modem Davicom 33.600. I tried to configure it with isapnp and I saw Linux found my modem. I use Linux RedHat 6.1. Can you tell me how to set my modem with isapnp? I have isapnp.conf file which contains information about my modem,but which one I should choose?
While the computer boots, in the table with ISA PNP devices I find my modem set on IRQ 10. But if I choose from isapnp.conf a configuration I get an error message about proc/interrupts (could not allocate 8 bit at 2e8...).
Can you tell me how could I handle this error or where I can find a driver for this Modem?
0
Comment
Question by:n_alexandru
  • 2
2 Comments
 
LVL 3

Expert Comment

by:biard
ID: 2278331
Do you know the hardware settings for your modem?  If it is jumperable, I would disable plug and play and set it to one of the following not already in use by the serial ports:

3f8 irq4
2f8 irq3
3e8 irq4
2e8 irq3

These are just the standard port settings for serial devices.  If you set it to 2e8, as it seems to be currently, then you (on your distribution of Redhat, which has kernel 2.2.x) need to tell linux to access it on port ttyS3 which corresponds to com 4 (or port 2e8).
0
 
LVL 3

Accepted Solution

by:
biard earned 150 total points
ID: 2280925
Are you there?  Didi this work or did you solve it otherwise?
0

Featured Post

Never miss a deadline with monday.com

The revolutionary project management tool is here!   Plan visually with a single glance and make sure your projects get done.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This installment of Make It Better gives Media Temple customers the latest news, plugins, and tutorials to make their Grid shared hosting experience that much smoother.
This article explains how to use the rsync command to create backups and sync data across hosts. Rsync is a very useful command that is often used to copy data, make backups, migrate hosts, and bridge the gap between site staging and production envi…
Learn several ways to interact with files and get file information from the bash shell. ls lists the contents of a directory: Using the -a flag displays hidden files: Using the -l flag formats the output in a long list: The file command gives us mor…
Learn how to find files with the shell using the find and locate commands. Use locate to find a needle in a haystack.: With locate, check if the file still exists.: Use find to get the actual location of the file.:
Suggested Courses
Course of the Month9 days, 9 hours left to enroll

591 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question