just hangin

I am new to the linux world .I am installing linux on a p2 350 w/8.6hd
128mgsram,ati all-in-wonder128 video
card w/16vram,15 inch avitron monitor(kds)with
108max dot clock,50-70Hor,40-120Vert
60hz at1280x1024,75hz at 1024x768.
 It seems like ive tried every combination with the configuration and im still having trouble.iv gone through the xf86config,and done the superprobe
but to noavail.i think i my need a patch for the kernal to support the card, but im new to the prompt type operation and im not quit sure how to install anything.if i could get the windows environment running im sure i could figure out the rest.
    any help would be greatly appreciated  
carman8Asked:
Who is Participating?

[Webinar] Streamline your web hosting managementRegister Today

x
 
laeuchliConnect With a Mentor Commented:
forget xf86config, Try XF86Setup. This is easier.
0
 
biardCommented:
What version of linux are you using, and which version of xfree86 do you have?
0
 
biardCommented:
That's not the best solution.  Won't get accelleration or the best color.

You can download the best server and use it under your distribution from suse.

http://www.suse.de/en/support/xsuse

Look for the section halfway down with this name:
XFCom_Rage128

Set up instructions are here:

http://www.suse.de/en/support/xsuse/#inst
0
 
biardCommented:
Redhat can use the rpm too.  Otherwise, get the tar.gz version.
0
All Courses

From novice to tech pro — start learning today.