cadenza
asked on
Converter BC++Builder -> Delphi
can anybody point me to a (free) program that converts Borland C++ Builder software to Delphi? (both version 4).
I would already be happy if it could only convert the bulk of the code, leaving the difficult lines unconverted.
The code I need to convert does not use typical C++ constructions like operator or method overloading.
Thanks,
Wim
I would already be happy if it could only convert the bulk of the code, leaving the difficult lines unconverted.
The code I need to convert does not use typical C++ constructions like operator or method overloading.
Thanks,
Wim
i dont think there is a full converter but see http://www.drbob42.com/tools/index.htm
ASKER
Hi inthe,
thanks for your quick reaction. I took a look and found only the header converter. I guess you were referring to this one? Unfortunately this is not enough for me.
If you don't mind, I'll wait some more to see if someone else happens to know of a 'more than a header' converter. If I don't get a positive reaction, I'll accept your 'no' for an answer and give you the points.
Cheers,
Wim
ps: nice site, of my fellow Dutchman Dr Bob!
thanks for your quick reaction. I took a look and found only the header converter. I guess you were referring to this one? Unfortunately this is not enough for me.
If you don't mind, I'll wait some more to see if someone else happens to know of a 'more than a header' converter. If I don't get a positive reaction, I'll accept your 'no' for an answer and give you the points.
Cheers,
Wim
ps: nice site, of my fellow Dutchman Dr Bob!
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
No further reactions, so I think this is a confirmation no such coverter exists.
Cheers,
Wim
Cheers,
Wim