[Webinar] Streamline your web hosting managementRegister Today

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 297
  • Last Modified:

COM port for EICON DIVA modem

Hello

I have an EICON DIVA PCI ISDN internal modem. I have just installed a software which uses modem communications, but uses its own modem definitions instead of the windows drivers. "Eicon Diva" appears in the modem list of the software, but the problem is that the port field only lists COM ports. But the neither of the two DIVA drivers (V.120 and X.75) is installed on a COM port (the ports are DiV120 and DiX75). Is there something I can do? I use the DIVA modem mostly for internet connections (Eicon Channel 0, which does not appear in the list of drivers in the modem properties (diagnostics tab) of the control panel), so I'm afraid changing the port of the DIVA drivers might cause conflicts (I also have an analog modem on COM2) and prevent me from using the ISDN modem for the internet.

Thanks in advance.

Raphael
0
goubet
Asked:
goubet
1 Solution
 
goubetAuthor Commented:
Adjusted points to 500
0
 
DavidHalperinCommented:
I would switch the COM of the Analog modem and let Eicon Diva take the COM 2 port.You should then try to install the Eicon as a modem as a fax modem asuming that you use it to send faxes. Or just uninstall the other Modem, install the Eicon first, then reinstall the analog modem and let the computer figure out what COM it will take. Many times WIN98( if that's what you're using) doesn't recognize the right COM and puts it on a taken COM.  SO you should change it (in the BIOS if neccessary)
0

Featured Post

Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now