Solved

inode

Posted on 2000-02-22
2
363 Views
Last Modified: 2010-04-21
I'm getting a Warning: Attempt to open already open device 120 with a duplicate inode.

Each time I get this message it displays a different device number.
How can I correct this and is there a command that will list each individual inode and it's associated device?
0
Comment
Question by:leapforjoy
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 

Accepted Solution

by:
cartoon022100 earned 100 total points
ID: 2546803
"ls -i /dev/* " command


will show all the inodes for all the devices.
0
 

Author Comment

by:leapforjoy
ID: 2547658
This is a SCO Unixware 2.13 system. To my knowledge it have not being downed ungracefully, but we added a Digi Port Server and presently when ever any of the ports (there are 16 port,one end of the cable plugs into Port Server{RJ45}and the other end to a modem {serial}) on the Port Server loose connection with the network, we have to reboot the Unix Server. Digi said that they don't know of any commands to reset the disconnected port. Other then rebooting the Server, which I don't feel is a good practice. This could happen anywhere for 1-2 times a week, but not on going. Depending on how many remote Showsite are active(Customer Service call ins).

We also have two more Port Servers (each have 8 ports)in two out of state locations.

Do you still think that something else could be contributed to the error. Also the Error message this time went away without any rebooting.
0

Featured Post

Transaction Monitoring Vs. Real User Monitoring

Synthetic Transaction Monitoring Vs. Real User Monitoring: When To Use Each Approach? In this article, we will discuss two major monitoring approaches: Synthetic Transaction and Real User Monitoring.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Let's say you need to move the data of a file system from one partition to another. This generally involves dismounting the file system, backing it up to tapes, and restoring it to a new partition. You may also copy the file system from one place to…
Every server (virtual or physical) needs a console: and the console can be provided through hardware directly connected, software for remote connections, local connections, through a KVM, etc. This document explains the different types of consol…
This video shows how to set up a shell script to accept a positional parameter when called, pass that to a SQL script, accept the output from the statement back and then manipulate it in the Shell.
In a previous video, we went over how to export a DynamoDB table into Amazon S3.  In this video, we show how to load the export from S3 into a DynamoDB table.

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question