Flash4 - Dual Boot PC - Sharing Applications

Posted on 2000-03-10
Last Modified: 2010-04-03
How do I share the same Flash4 application on my dual boot PC running Win95 and Win NT 4.0 ?
I have installed Flash on the D: drive which is NT 4.0 and would like to access it when I'm in Win95.
Question by:pleasantvillas
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 4

Expert Comment

ID: 2607636
> Points: 50 (Easy)
Hardly !!!

Firsty you won't be able to do this if you d: drive is NTFS...  it needs to be FAT formatted.

Now you all you have to do is install flash in 95 to the same directory as the existing installation, at a guess i'd say that was D:\Program Files\Macromedia\Flash 4.

This will install all the required system files into the Win95 system and should allow you to access the program from both operating systems.

Let me know how you get on.

Expert Comment

ID: 2607780
coopa changed the proposed answer to a comment

Accepted Solution

coopa earned 50 total points
ID: 2688936
Did this work ?
It should, as that's how I have it set up now.

Expert Comment

ID: 2734522
Please respond.

Featured Post

[Webinar] Learn How Hackers Steal Your Credentials

Do You Know How Hackers Steal Your Credentials? Join us and Skyport Systems to learn how hackers steal your credentials and why Active Directory must be secure to stop them. Thursday, July 13, 2017 10:00 A.M. PDT

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I know the transition can be hard. We got used to the ease of use ActionScript 2 had, but honestly, it became problematic later on, especially if designers were involved in the project and found it easy to add code as they saw fit. So, this artic…
Introduction This article is primarily concerned with ActionScript 3 and generally specific to AVM2.  Most suggestions would apply to ActionScript 2 as well, and I've noted those tips that differ between AS2 and AS3. With the advent of ActionS…
The goal of the tutorial is to teach the user how to select the video input device. Make sure you have an input device that in connected and work and recognized by Adobe Flash Media Live Encoder and select it in the “video input” menu.
The goal of the tutorial is to teach the user what frame rate is, how to control it and what effect it has on the video.

632 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question