Link to home
Start Free TrialLog in
Avatar of ghume
ghume

asked on

3200C slow scanning speed

Scanning a full page takes approximately 55 seconds on my older Compaq 300 Mhz.  Just bought an HP9694 750 Mhz and scan time is almost 4 minutes/page.  The light bar indexes forward about an inch an back about a half inch at a time instead of one continuous scan of the page.  Any ideas?
Avatar of TheRat
TheRat

Reboot PC. on first blue screen hit "F1". This should get into the BIOS. Right arrow across to "advanced" then arrow down to "I/O device config" and hit enter. Arrow down to "Parallel Port Mode", we need to change this to EPP. to do that use the + or - keys on the keypad. Once it is "EPP" hit escape key once then F10 key. The computer will now reboot and your scanner should work a little faster. Also lower your dpi settings. Hope this helps a bit
ASKER CERTIFIED SOLUTION
Avatar of Member_2_49692
Member_2_49692

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial