Solved

Setting up A dns server

Posted on 2000-03-18
2
217 Views
Last Modified: 2010-03-18
I have tried to setup a dns server.
Everyting seems to be fine but i get this in my logs allthe time:
May 19 11:38:23 abbie named[280]: Zone "0.168.192.in-addr.arpa" (file 192.168.0): No default TTL set using SOA minimum instead


Hiw can i fix that
0
Comment
Question by:wqclatre
2 Comments
 
LVL 1

Accepted Solution

by:
dserna earned 50 total points
ID: 2631406
To fix that "problem" all you have to do is add a statement to that zone file with a TTL value. For example:

; SOA rec
$TTL 1H
tapatio.org.  IN SOA ns.tapatio.org.
dnsmaster.ns.tapatio.org. (
                           2000013000    ; serial number
                           10800       ; refresh every 3 hours
                           3600        ; retry every hour
                           604800      ; expire after a week
                           86400 )     ; TTL of 1 day
;NS Records (Name Servers)

tapatio.org.             IN  NS  ns.tapatio.org.
tapatio.org.             IN  NS  ns2.tapatio.org.


It seems that with the latest versions of bind, 8.2.x you have to specify a TTL at  the top of the zone file with a syntax of $TTL <value of ttl>.

Hope that helps.

-Daniel-
0
 
LVL 2

Author Comment

by:wqclatre
ID: 2631429

OK, thnks...
0

Featured Post

Free learning courses: Active Directory Deep Dive

Get a firm grasp on your IT environment when you learn Active Directory best practices with Veeam! Watch all, or choose any amount, of this three-part webinar series to improve your skills. From the basics to virtualization and backup, we got you covered.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Ubuntu server 12.04 creating broadcast on network 6 98
FTP File Transfer Failure 13 188
Redirect mail server from IP to IP 2 100
Set linux box as ip router 3 48
I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
With Secure Portal Encryption, the recipient is sent a link to their email address directing them to the email laundry delivery page. From there, the recipient will be required to enter a user name and password to enter the page. Once the recipient …

685 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question