• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 390
  • Last Modified:

How can i install a new hd in SCO?

I use SCO Open Server 5, i need install a new hd and i follow the instructions of help for that.
First i run makedev hd 0 1. After  that fdisk and another instruccions but i don't know how to mount the partition, because i open a filesystem administrator and i can't see the partition, what is the wrong pass?
0
jmav
Asked:
jmav
1 Solution
 
sparks1970Commented:
What type of hard drive are you adding, SCSI or IDE?
0
 
philiph_elvisCommented:
First, use the "divvy" command to check that the drive has valid OSR5 slices on it.  Mountable partitions will be of type HTFS.

Let's see, the terminology is confusing - first you use fdisk to create partitions, then divvy is used to divide those partitions into slices.  The slices are what can be used as actual filesystems.

Assuming you have the disk properly partitioned and divvied, you can use the mount command to mount filesystems.

The names of the divvy slices will vary depending on whether the disk is scsi or ide.  I believe the ide slices will be of the form hd1, hd2, etc., while the scsi slices will be of the form sd0, sd1, etc.

So, to mount the first partition of an ide hd, you could do something like:

# mount -t HTFS /dev/hd0 /mnt

My SCO knowledge is getting a bit hazy, so apologies if I don't have some of the words quite right.
0

Featured Post

Free Tool: SSL Checker

Scans your site and returns information about your SSL implementation and certificate. Helpful for debugging and validating your SSL configuration.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now