?
Solved

MScomm hardware baud rate.

Posted on 2000-03-30
2
Medium Priority
?
483 Views
Last Modified: 2013-12-25
I need to know what is the sharp boud rate that i get on the comm hardware when configuring it to 57600 bps. in the MSDN help its look like the value that is available on this case is 56000, but trying to set a different value else then 57600 or 56000 is forbidden, so maybe its setting the port to 57600 despite what the MSDN tells.
0
Comment
Question by:AmirG
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
2 Comments
 
LVL 28

Expert Comment

by:AzraSound
ID: 2696887
Public Const BAUD_56K = &H8000&
Public Const BAUD_57600 = &H40000


i think thats all that it will recognize.  Can you post some code?
0
 
LVL 28

Accepted Solution

by:
AzraSound earned 340 total points
ID: 2710991
One question that I often field is, "What speeds does MSComm support." The XMComm control, like MSComm32.ocx that comes with VB5 or later supports speeds up to 115200 bps. If you use either with a modem, make sure that you use a speed that is actually supported by the modem's serial port. These speeds are: 300, 1200, 2400, 9600, 19200, 38400, 57600, and 115200 bps. Do not attempt to use a speed like 28800 or 33600 bps. While the modem may connect at this speed, it CANNOT set its serial port to this speed. Instead, select a higher speed than the actual connect speed. 57600 or 115200 bps usually are best. Enable modem error correction and data compression, of course.



taken from the site:
http://ourworld.compuserve.com/homepages/richard_grier/xmcomm.htm

you may find other info at that site very useful as well

0

Featured Post

Free Tool: Site Down Detector

Helpful to verify reports of your own downtime, or to double check a downed website you are trying to access.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When trying to find the cause of a problem in VBA or VB6 it's often valuable to know what procedures were executed prior to the error. You can use the Call Stack for that but it is often inadequate because it may show procedures you aren't intereste…
Most everyone who has done any programming in VB6 knows that you can do something in code like Debug.Print MyVar and that when the program runs from the IDE, the value of MyVar will be displayed in the Immediate Window. Less well known is Debug.Asse…
Get people started with the process of using Access VBA to control Outlook using automation, Microsoft Access can control other applications. An example is the ability to programmatically talk to Microsoft Outlook. Using automation, an Access applic…
Show developers how to use a criteria form to limit the data that appears on an Access report. It is a common requirement that users can specify the criteria for a report at runtime. The easiest way to accomplish this is using a criteria form that a…
Suggested Courses

650 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question