Solved

NFS

Posted on 2000-04-06
1
377 Views
Last Modified: 2013-12-23
I have a Solaris 2.6 box ( client ) and a Linux box ( Server ).  Basically the linux box has a couple of shares through NFS.  When i mount a share on the solaris box it mounts up fine but warns me "No Networking Locking", then it states the name of the server.  Which makes me suspect that its something to do with the way I have setup the linux box.  Linux is Suse 6.2  My exports file looks like :
/name of share (rw,no_root_squash,anonuid=504,anongid=101)  
Any ideas.. It sounds to me like its a expecting an extra facility of NFS.  I have searched and searched.  Any ideas ?
0
Comment
Question by:paulyc
1 Comment
 
LVL 40

Accepted Solution

by:
jlevie earned 200 total points
Comment Utility
I suspect it's complaining about the Linux box's NFS implementation not supporting the NFS locking mechanism Solaris wants to use. Your export looks okay to me. I use "*(rw,no_root_squash)" on a Redhat 6.1 system and can mount the exported file system on Solaris 2.6, 7, and 8 without any problems. You might try mounting with "-o vers=2" (see "man mount_nfs") to see if using an older protocol might work better.

And of course it might also be a problem with the patch level of the 2.6 box. Is it up to date, at least with respect to the "Recommended Patches"?
0

Featured Post

How your wiki can always stay up-to-date

Quip doubles as a “living” wiki and a project management tool that evolves with your organization. As you finish projects in Quip, the work remains, easily accessible to all team members, new and old.
- Increase transparency
- Onboard new hires faster
- Access from mobile/offline

Join & Write a Comment

Suggested Solutions

#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

772 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now