Solved

Flashing ASUS P3B-F BIOS

Posted on 2000-04-09
2
910 Views
Last Modified: 2008-03-03
I am trying to upgrade to the new ASUS P3BF bios version, since the old one keeps reporting wrong CPU temprature, and keeps messing up my programs because of it... i wanted to know if anyone could tell me how to do it.. do I have to change any jumpers? I was reading some articles on the ASUS site, but they were confusing. please help if you know what you are doing. i have never flashed a bios before... thanks...

Dee
0
Comment
Question by:kooltek
2 Comments
 
LVL 11

Accepted Solution

by:
RoadWarrior earned 25 total points
Comment Utility
What articles were you looking at? ASUS have thier own flash utility for their bios upgrades and usage instructions are here....
http://www.asus.com/Products/Motherboard/flash.html

Referring to revision 1.10 of the manual for PCB 1.00 I see there appears to be no jumpers needing setting for flashing the BIOS. However, the instructions for flashing the bios state "Upon first use of the computer..." which means the CMOS settings need to be clear before flashing, so go through setup and note down all your settings, make the bios disk first in DOS, then remove the motherboard battery (that silver thing the size of a nickel) for 1/2 an hour, then put it back in and boot the bios flash setup disk that you made according to the instructions at the top of the page above.

Follow the instuctions given in the page above and on screen, IT IS A VERY GOOD IDEA TO SAVE YOUR OLD BIOS, just in case the new one works worse

If you still have problems/questions, please be specific.

The Aflash utility and the bios file seem easy to find on the site, if you need pointers though, just ask.

regards,

Road Warrior
0
 

Expert Comment

by:alazare
Comment Utility
0

Featured Post

How your wiki can always stay up-to-date

Quip doubles as a “living” wiki and a project management tool that evolves with your organization. As you finish projects in Quip, the work remains, easily accessible to all team members, new and old.
- Increase transparency
- Onboard new hires faster
- Access from mobile/offline

Join & Write a Comment

We recently endured a series of broadcast storms that caused our ISP to shut us down for brief periods of time. After going through a multitude of tests, we determined that the issue was related to Intel NIC drivers on some new HP desktop computers …
Stuck in voice control mode on your Amazon Firestick?  Here is how to turn it off!!!
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
When you create an app prototype with Adobe XD, you can insert system screens -- sharing or Control Center, for example -- with just a few clicks. This video shows you how. You can take the full course on Experts Exchange at http://bit.ly/XDcourse.

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now