[Webinar] Streamline your web hosting managementRegister Today

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 1261
  • Last Modified:

Serial Printer - Cable Pin out Config

I need to Print with a Ticket Printer on a serial Port Com1/Com2 but My printer dont receive any signal print onli garbage I need an configuration to Db9 to db25

Any Clue ?

Thanks.
0
chaveza
Asked:
chaveza
1 Solution
 
wlaarhovCommented:
DB9    DB25
1      8
2      3
3      2
5      7
6      6
7      4
8      5
9      22

If you need to have DTR connect 6,8 and 20 on the db25 side.
BUT...
If you do get data out with the current cable, chances are that the cable is ok.
It could be the baudrate or number of bits or the parity bit.
If the data looks fine in the beginning, but gets garbled after about a half to one and a half page, it is handshaking.
Normaly handshaking is only software, you need to connect only 2,3 and 7 are connected (looked from the db25 connector side)
Hope this helps
0
 
chavezaAuthor Commented:

0

Featured Post

Keep up with what's happening at Experts Exchange!

Sign up to receive Decoded, a new monthly digest with product updates, feature release info, continuing education opportunities, and more.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now