• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 201
  • Last Modified:

Problem with Install Shield Send To Media

I used install shield to install my program and everything was working okay until I tried to send the media build to the disks. In the install shield I selected 1.44 disks and it shows two disks but when I go to Send To Media I get the error that "There is not enough disk space on the target disk". Any suggestions about what it could be.

Thanks
Louise
0
c_louise
Asked:
c_louise
1 Solution
 
simmvarCommented:
Hi Louise

Please check whether u have replaced the setup.bmp.  If u have created a new bmp to replace the setup.bmp check its size it should not exceed somewhere around 400K.  Reduce it and it will work bcos the first disk will have to have this file.

simmave
0
 
c_louiseAuthor Commented:
That was a good suggestion but not the solution. The solution did have something to do with the size of the program. I had used install shield on the program before and had not completely cleaned off the system, so when I reinstalled the program it was putting the two programs into one and therefore making the program too big for the disks.

Thanks
Louise
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Free Tool: IP Lookup

Get more info about an IP address or domain name, such as organization, abuse contacts and geolocation.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now