Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
?
Solved

No display?

Posted on 2000-04-24
4
Medium Priority
?
179 Views
Last Modified: 2010-04-27
Hey,
  After about an hour or so of my computer being on the display dies...and after shutting the computer off and turning it back on it refuses to show up again...but if I leave it off for a while and then come back, it boots up fine, only it repeats the above process, What is wrong? is it my monitor?

*COnfused*
0
Comment
Question by:Xsurfer02
  • 2
4 Comments
 

Accepted Solution

by:
neo2002 earned 1800 total points
ID: 2744041
Xsurfer02,
  After your computer is running for a while your video card tends to heat up, depending on the quality of your motherboard the card may slip out from it's slot..the only thing to fix this is open the computer and jam it back in there. I had this problem a while ago with my older computer.

Hope this is the answer.

-Neo
0
 

Author Comment

by:Xsurfer02
ID: 2744050
Thanks Neo, it worked.
0
 
LVL 5

Expert Comment

by:nfroio
ID: 2744056
Or your video card is not compeltely seated well, or, your monitor cable is giving in, or your monitor cable does not have any magnectic sheilding.

Check all those, and if still a problem, then I would start to suspect the monitor, if you can, do you have any friends that can let you borrow their monitor, new or old, for a day or two, if there monitor works w/o problems, its probably your monitor ready to die.

If same problems occur with another monitor that you know is good, then I would start checking the video card, drivers,  and cable.

Good luck
0
 
LVL 5

Expert Comment

by:nfroio
ID: 2744061
Too slow......

not enuff coffee...
0

Featured Post

Reclaim your office - Try the MB 660 headset now!

High level of background noise often makes it difficult for employees to concentrate fully on their jobs – or to communicate clearly on calls. The MB 660 headset helps you create a disruption free workspace.  

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This is about my first experience with programming Arduino.
This article shows how to use a free utility called 'Parkdale' to easily test the performance and benchmark any Hard Drive(s) installed in your computer. We also look at RAM Disks and their speed comparisons.
With just a little bit of  SQL and VBA, many doors open to cool things like synchronize a list box to display data relevant to other information on a form.  If you have never written code or looked at an SQL statement before, no problem! ...  give i…
Enter Foreign and Special Characters Enter characters you can't find on a keyboard using its ASCII code ... and learn how to make a handy reference for yourself using Excel ~ Use these codes in any Windows application! ... whether it is a Micr…
Suggested Courses

577 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question