Solved

about ccnp career certification

Posted on 2000-04-23
1
296 Views
Last Modified: 2010-04-11
ccnp 1.0 will retire on 7.31
i think i can't complete the ccnp 1.0 in 7.31.if i only finish 640-403 within 7.31 and not the all test.
should i take 640-503 again ?
0
Comment
Question by:bitsnake
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 3

Accepted Solution

by:
apadua earned 50 total points
ID: 2743486
Yep. You're in trouble! Don't even take 403 anymore, it's going to be worthless by august. Here's cisco's faq on the subject, but you will have to take 503, even if you already had 403.

Sorry for the bad luck.


Andre


http://www.cisco.com/warp/public/10/wwtraining/certprog/faq1.html
0

Featured Post

Create the perfect environment for any meeting

You might have a modern environment with all sorts of high-tech equipment, but what makes it worthwhile is how you seamlessly bring together the presentation with audio, video and lighting. The ATEN Control System provides integrated control and system automation.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

When it comes to security, there are always trade-offs between security and convenience/ease of administration. This article examines some of the main pros and cons of using key authentication vs password authentication for hosting an SFTP server.
Most of the applications these days are on Cloud. Cloud is ubiquitous with many service providers in the market. Since it has many benefits such as cost reduction, software updates, remote access, disaster recovery and much more.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

749 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question