Solved

Transceiver for BNC to RJ-45

Posted on 2000-04-27
2
800 Views
Last Modified: 2013-11-09
I would like to know if there is a device like a transceiver to convert 10base2 to 10baseT.  I have a junky decservers that can only connect through BNC.  So right now we use a hubs BNC port and the MDI port to connect it to the network.  However all the other ports are empty.  Is there something better?
0
Comment
Question by:markg1
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 1

Accepted Solution

by:
fco_jimenez earned 50 total points
ID: 2758086
There are media converters that can change from a medium to other.
The average price of these devices is US $ 125.
You can consult the following links
http://www.transition.com/products/mediacon/ecxtbt04.html
and
http://www.alliedtelesyn.co.uk/products/prod_details_uk.asp?lang=uk&Prod_ID=MC15&type=MEDIACONVERTER

You can buy one of them and connect the DEC stations to the BNC pot (daisy chain) an connect the UTP port to your UTP hubs (cascade).
0
 

Author Comment

by:markg1
ID: 2760959
Just what I wanted.
Thanks.
0

Featured Post

Manage your data center from practically anywhere

The KN8164V features HD resolution of 1920 x 1200, FIPS 140-2 with level 1 security standards and virtual media transmissions at twice the speed. Built for reliability, the KN series provides local console and remote over IP access, ensuring 24/7 availability to all servers.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Data center, now-a-days, is referred as the home of all the advanced technologies. In-fact, most of the businesses are now establishing their entire organizational structure around the IT capabilities.
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

728 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question