Solved

login to a peer Windows98 PC

Posted on 2000-05-02
7
153 Views
Last Modified: 2013-12-28
I'd like to know how to login from one PC to another (both running Windows 98) and are networked using TCP/IP protocol.
If one is in Linux or Unix, I can login
from the other with no problem. I tried
to setup DialUP Networking in one to answer the phone line, but all it does is answer the phone then freezes in there with garbage being displayed on the sreeen.
0
Comment
Question by:yvanlek
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
7 Comments
 

Author Comment

by:yvanlek
ID: 2769985
Adjusted points from 0 to 75
0
 
LVL 1

Expert Comment

by:jdtan
ID: 2770043
Assuming you have the correct access privileges on both machines, you could try:

Start -> Run, and then type:
\\199.2.210.18\c$

where 199.2.210.18 is the machine's IP number and c$ is the default name of the C: drive on that machine.

Or you can look into programs like Timbuktu, which will allow you to remotely control other machines over TCP/IP or dialup with much more ease than what MS buils in.
0
 
LVL 1

Expert Comment

by:RickWillkins
ID: 2770699
check to see that the settings for your modems are set the same. (port speed, etc) also, make sure that the server type is correct, for instance,  set it to the protocol for win98/nt, not slip, (for unix).
check your drivers for the modem as well....and upgrade to the latest dial up networking version.  1.3 I believe, available at microsoft.
http://support.microsoft.com/support/kb/articles/Q191/5/40.ASP 
0
Flexible connectivity for any environment

The KE6900 series can extend and deploy computers with high definition displays across multiple stations in a variety of applications that suit any environment. Expand computer use to stations across multiple rooms with dynamic access.

 

Expert Comment

by:scottem
ID: 2770952
Not sure what you are trying to do? Do you just want them to communicate via network or are you trying to connect thru dial-up? I do not understand why you want to connect using phone line. But it does work that way because I have done it, only to test modem connection speed nothing else.
0
 

Author Comment

by:yvanlek
ID: 2771485
Maybe I should make it clearer: The intention is to remotely access a PC
by phone line and execute some works
I used to do it with PC Anywhere or Procomm Plus, but I like to try it on Dial Up Networking under Connection Tab.
Any idead anyone out there?
0
 

Expert Comment

by:scottem
ID: 2771511
If you were running some kind of server program on one machine you could connect to it to transfer files, download files. Otherwise as far as I know you need Pc anywhere or something like it. WIN 2000 may have more options to it? Do not know though.
0
 

Accepted Solution

by:
robert_pyne earned 75 total points
ID: 2780189
Firstly you need to setup Dialup Server on one of the Windows98 machines.  Then you log in that machine from the other using dialup networking.  Once connected you can try a program called RADMIN downloadable from www.famatech.com.  This is a cool little program that lets to take control of another pc using only tcp/ip.
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

When you start your Windows 10 PC and got an "Operating system not found" error or just saw  "Auto repair for startup" or a blinking cursor with black screen. A loop for Auto repair will start but fix nothing.  You will be panic as there are no back…
How to record audio from input sources to your PC – connected devices, connected preamp to record vinyl discs, streaming media, that play through your audio card: Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10 – both 32 bit & 64.
With the advent of Windows 10, Microsoft is pushing a Get Windows 10 icon into the notification area (system tray) of qualifying computers. There are many reasons for wanting to remove this icon. This two-part Experts Exchange video Micro Tutorial s…
This is used to tweak the memory usage for your computer, it is used for servers more so than workstations but just be careful editing registry settings as it may cause irreversible results. I hold no responsibility for anything you do to the regist…

756 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question