Solved

Second Hard Drive in G3

Posted on 2000-05-06
2
367 Views
Last Modified: 2013-11-24
I have a Baige Power Macintosh G3 Mini-tower.  Can I install a second IDE hard drive.  If yes, what are the steps I should take.
0
Comment
Question by:wilkofj
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 30

Accepted Solution

by:
weed earned 200 total points
ID: 2785065
Yes you can. You need to set it up as a slave hard drive to the one you have in there already. You will end up with a Master and Slave drive. Details on configuration etc are available from apple at http://til.info.apple.com/techinfo.nsf/artnum/n24342
0
 
LVL 1

Author Comment

by:wilkofj
ID: 2785911
Thanx for the help!
0

Featured Post

Optimum High-Definition Video Viewing and Control

The ATEN VM0404HA 4x4 4K HDMI Matrix Switch supports 4K resolutions of UHD (3840 x 2160) and DCI (4096 x 2160) with refresh rates of 30 Hz (4:4:4) and 60 Hz (4:2:0). It is ideal for applications where the routing of 4K digital signals is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Apple's Mac OS X has become an official member of the malware club. The Flashback Trojan has affected over half million Macs, worldwide. It is behavior that ultimately gets malware onto a person’s computer. Obsolete or out-of-date software helps…
Smartwatches: just a fashion accessory or a useful device for all? The Apple Watch (http://www.apple.com/watch/) was launched in April of 2015 and has become a new way for iPhone users to stay connected. Ranging from $349 to $17,000, the Apple Watch…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…

630 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question