Solved

Conection to internet

Posted on 2000-05-06
3
225 Views
Last Modified: 2013-12-15
I have installed modem in ttyS1 (COM2)
and I have phone number for internet.
But I couldn't connect to internet
How can I configure modem and network for connection?
(My internet provider - internet zahav)
Thanks
0
Comment
Question by:yairt
  • 2
3 Comments
 
LVL 2

Accepted Solution

by:
modulus earned 100 total points
ID: 2786807
1. Make sure that it's not a winmodem (http://www.o2.net/~gromitkc).

2.
You'll need to find out the IRQ/interrupt of your modem (either from BIOS settings or physical jumpers on the card) and the I/O port.

3. use /sbin/setserial /dev/ttyS1 irq X port Y
to make sure the OS knows how to access the modem

4.  Find out if your ISP uses PAP/CHAP or someother authentication scheme (create appropriate /etc/ppp/pap-secrets file if it is needed)

This should get you started. A fuller and better explanation than I could give in this limited space can be found at:
http://www.linuxdoc.org/HOWTO/ISP-Hookup-HOWTO.html
http://www.linuxdoc.org/HOWTO/Modem-HOWTO.html

If you read through these, try things out and then come back here with problems I'll be glad to help.

Best wishes,
modulus
0
 

Expert Comment

by:PrblmSlvr
ID: 2803401
Reasonable for a newbie.
Linuxconf could be a help here.
0
 
LVL 2

Expert Comment

by:modulus
ID: 2805782
PrblmSlvr,
good point on Linuxconf if it's just that there's a config problem.  But we don't know that yet.  Also to use Linuxconf yairt will have to find out the info about the DNS and there's no point in trying any of that if it's a winmodem.  Point taken thought,
best wishes,
modulus
0

Featured Post

Enterprise Mobility and BYOD For Dummies

Like “For Dummies” books, you can read this in whatever order you choose and learn about mobility and BYOD; and how to put a competitive mobile infrastructure in place. Developed for SMBs and large enterprises alike, you will find helpful use cases, planning, and implementation.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
000webhost.com default error log 1 40
how to configure linux OS using Ubuntu 7 58
Upgrade BIOS / EUFI at Scale 4 55
trouble on installing syslog-ng on CentOS 7 7 54
rdate is a Linux command and the network time protocol for immediate date and time setup from another machine. The clocks are synchronized by entering rdate with the -s switch (command without switch just checks the time but does not set anything). …
Introduction We as admins face situation where we need to redirect websites to another. This may be required as a part of an upgrade keeping the old URL but website should be served from new URL. This document would brief you on different ways ca…
Learn how to navigate the file tree with the shell. Use pwd to print the current working directory: Use ls to list a directory's contents: Use cd to change to a new directory: Use wildcards instead of typing out long directory names: Use ../ to move…
This demo shows you how to set up the containerized NetScaler CPX with NetScaler Management and Analytics System in a non-routable Mesos/Marathon environment for use with Micro-Services applications.

860 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question