Solved

Cisco 677 ADSL

Posted on 2000-05-10
6
249 Views
Last Modified: 2010-05-18
I'm having some problems here. I want to setup a ftp server... Also be able to play multiplayer games with people connecting to me. However, my dsl modem (router, same thing...) doesnt do it. When I goto winipcfg, my ip address shows up as 10.0.0.2 ... The gateway is 10.0.0.1 ... When I goto alltel.net, it tells me my ip address is 166.102.254.35 ... When i ping it, it works. When i run an ftp server, it tells me that my ip is 10.0.0.2 ... No one can connect to me! No matter what! How can I do this? Alltel won't give me tech support on this issue, and they told me that the site that tells me how to do it, is down. So im clueless. Hopefully someone out there can help!
0
Comment
Question by:cdc_sickle
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
6 Comments
 
LVL 3

Expert Comment

by:ran1
ID: 2799955
Try Cisco Documentation, Technical Assistance Center and Support Services.
If it's new you are entitled to service support from CISCO.

http://www.cisco.com/univercd/cc/td/doc/pcat/677.htm

http://www.cisco.com/warp/public/44/jump/dsl_customer_premises_equipment.shtml

http://www.cisco.com/pcgi-bin/ibld/view.pl?i=support&m=guest
Technical Assistance Center:    Search:  Cisco 677  

http://www.cisco.com/public/Support_root.shtml  Support.
0
 

Author Comment

by:cdc_sickle
ID: 2802878
I did some of that stuff... And then my dsl stopped working, so I had to reset it. Maybe my isp doesn't support it. However, they said they do, just don't give the tech support. Is their a cisco person i can call?
0
 
LVL 3

Accepted Solution

by:
apadua earned 200 total points
ID: 2803197
What you are looking for is NAT. More specifically, NPAT. You have an private address configured on your network, and you're right: no outsiders will ever be able to surf from it. What you need to do is, using NPAT (Network Port Address Translation), configure your router so that every request that comes to the FTP port (TCP ports 20 and 21) is redirected to 10.0.0.2


Your router has two IP addresses. One public, and one private. What NPAT does is translate these addresses. Once it is configured, you advertise your FTP server as your Public address 166.x.x.x.
When it receives an ftp connection to this address, it automatically sends it to your ftp server. This means that your ftp server will receive a connection to him (10.0.0.2) from the router's INTERNAL, or private, address (10.0.0.1). It will send the results to the router, and the router will forward them to the machine on the Internet that requested it. It's transparent to the client machine on the public network. The only thing is, you need to advertise your public IP. You can even have different machines doing different things. For example, and FTP server receiving ports 20 and 21, and a different machines being the HTTP server (receiving port TCP/80).

You can find how to configure NAT on your router in:

http://www.cisco.com/univercd/home/home.html

Do a search for NAT and your router model.

Good luck,

Andre
0
Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

 
LVL 3

Expert Comment

by:apadua
ID: 2803198
Sorry, the correct url is:

http://www.cisco.com/univercd/home/home.htm
0
 

Author Comment

by:cdc_sickle
ID: 2805984
Yeah, thats actually what they told me... But they didn't say how... I'll try this page...
0
 

Author Comment

by:cdc_sickle
ID: 2806007
It worked!
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is a guide to configure bridging on Cisco Routers.  This is something I never knew was possible until after making a few phone calls to Cisco.  Using bridging saved our company money by not requiring us to purchase a new switch.  Bridgi…
The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

739 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question