The KN8164V features HD resolution of 1920 x 1200, FIPS 140-2 with level 1 security standards and virtual media transmissions at twice the speed. Built for reliability, the KN series provides local console and remote over IP access, ensuring 24/7 availability to all servers.
Course Of The Month
6 days, 21 hours left to enrollBecome a Premium Member and unlock a new, free course in leading technologies each month.
Solved
Video Problems
Posted on 2000-05-11
I am using Redhat 6.0 on a Toshiba Satellite Pro 410CS. I have gotten MetroX to run using the Trident8900 video card driver. However this does not support 800x600 only 640x480 which will not do. Where or how do I get this to use 800x600, where are drivers for this. I am a newbie to Linux as if you couldnt tell.
[X]
Welcome to Experts Exchange
Add your voice to the tech community where 5M+ people just like you are talking about what matters.
- Help others & share knowledge
- Earn cash & points
- Learn & ask questions
-
3
4 Comments
I don't know if it helps because I cannot verify it (I lack these portable :) )
Usually it is a good thing to disable display expansion/stretching in the Laptops BIOS Setup when you cannot select other resolutions than 640x480.
Please tell me, if it also works with Toshiba portable.
Usually it is a good thing to disable display expansion/stretching in the Laptops BIOS Setup when you cannot select other resolutions than 640x480.
Please tell me, if it also works with Toshiba portable.
Ok, because this didn't work I couldn't go to sleep yet and did a little searching. Try this XF86config file. This should work:
http://expert.cc.purdue.edu/~lo/XF86Config
Good luck :)
http://expert.cc.purdue.edu/~lo/XF86Config
Good luck :)
Featured Post
Question has a verified solution.
If you are experiencing a similar issue, please ask a related question
I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.
IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable.
1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
In this video, viewers will be given step by step instructions on adjusting mouse, pointer and cursor visibility in Microsoft Windows 10. The video seeks to educate those who are struggling with the new Windows 10 Graphical User Interface.
Change Cu…
Suggested Courses
Course of the Month6 days, 21 hours left to enroll
726 members asked questions and received personalized solutions in the past 7 days.
Join the community of 500,000 technology professionals and ask your questions.