?
Solved

Novell Volume mount

Posted on 2001-06-04
2
Medium Priority
?
1,066 Views
Last Modified: 2012-08-13
Where/how is the best way to have Linux automatically mount Novell volumes on start up?
Installed RH7.1. From the console I can use `ipx_configure --ipx_primary=on --ipx_auto_interface=on'
then i can use
`ncpmount -S [Novell Server Name] /mnt/novell -U [Novell User to login as] -n'
and it logs in and mounts the Netware volumes properly. I read in one howto that you should wait 10 seconds after  ipx_configure before running ncpmount. What is the recommended syntax and what script would this be best to add to or ? so this is part of the start up process? I am just getting started with Linux.
TIA for your help
0
Comment
Question by:emery_k
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 5

Accepted Solution

by:
vsamtani earned 100 total points
ID: 6152735
You could put the commands in /etc/rc.d/rc.local . This is the last script to run in the RedHat boot process, and all you need to do is edit the file with your favourite text editor. You could just add the ipx_configure and ncpmount commands to the end of the rc.local script, and perhaps put a sleep 10 command aftert the ipx_configure to make the script pause for 10s before continuing.

Vijay

0
 
LVL 1

Author Comment

by:emery_k
ID: 6152874
Thanks.  Works great.
Just the kind of clarification I was hoping for. I had already used the ipx_configure in rc.local but wasn't sure how to do the delay or if that was the best place.
0

Featured Post

Plug and play, no additional software required!

The ATEN UE3310 USB3.1 Gen1 Extender Cable allows users to extend the distance between the computer and USB devices up to 10 m (33 ft). The UE3310 is a high-quality, cost-effective solution for professional environments such as hospitals, factories and business facilities.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
This is my first video review of Microsoft Bookings, I will be doing a part two with a bit more information, but wanted to get this out to you folks.
Suggested Courses
Course of the Month15 days, 8 hours left to enroll

741 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question