Solved

System Error Messages in Server 2000

Posted on 2001-06-05
4
230 Views
Last Modified: 2010-04-13
I am getting the following Error Mesages that I have been unable to find KB help with:

This host can not be ACS since the Active Directory has not been properly configured via the QoS ACS management console. Please configure the subnets via the QoS ACS mangement console. Event ID: 10035 Source: RSVP

QoS RSVP has failed to find any interfaces with traffic control enabled. Install QoS traffic control services via network and dial-up connections. Event ID: 10047 Source: RSVP

Unable to add the interface Internal with the Router Manager for the IP protocol. The following error occurred: The parameter is incorrect. Event ID: 20106 Souce: RemoteAccess

Any help would be greatly appreciated!

Doreen


0
Comment
Question by:baldridged
  • 2
  • 2
4 Comments
 

Author Comment

by:baldridged
ID: 6158186
Additional info:

I am runnning Server 2000 w/ DNS and DHCP, static DSL, 2 Windows Pro clients so far.  SP  1 is installed, have not gone to SP 2 yet.  

Thanks.
0
 
LVL 1

Accepted Solution

by:
chasdw earned 100 total points
ID: 6159777
Your first error:  you installed the QoS Admission Control Services, and have not configured subnets for your network.
Administrative tools > QoS Admission Control
     right click on subnetwork settings
     add subnetwork
     put in the IP Network address for your subnetworks.
     ie: 192.168.1.0/24
     then configure the settings for the subnetwork.
http://www.microsoft.com/windows2000/en/messages/4173.htm

second error:  more than likely will be taken care of when you configure QoS ACS.

third error: sounds like you have installed RRAS and have it configured incorrectly.
http://www.microsoft.com/windows2000/en/messages/4154.htm

Could not find any better information...hope this helps.


0
 
LVL 1

Expert Comment

by:chasdw
ID: 6159884
Your first error:  you installed the QoS Admission Control Services, and have not configured subnets for your network.
Administrative tools > QoS Admission Control
     right click on subnetwork settings
     add subnetwork
     put in the IP Network address for your subnetworks.
     ie: 192.168.1.0/24
     then configure the settings for the subnetwork.
http://www.microsoft.com/windows2000/en/messages/4173.htm

second error:  more than likely will be taken care of when you configure QoS ACS.

third error: sounds like you have installed RRAS and have it configured incorrectly.
http://www.microsoft.com/windows2000/en/messages/4154.htm

Could not find any better information...hope this helps.


0
 

Author Comment

by:baldridged
ID: 6168849
I apologize for not getting back to you sooner.  Thank you for your help with this.  Doreen
0

Featured Post

Free Tool: Path Explorer

An intuitive utility to help find the CSS path to UI elements on a webpage. These paths are used frequently in a variety of front-end development and QA automation tasks.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

NTFS file system has been developed by Microsoft that is widely used by Windows NT operating system and its advanced versions. It is the mostly used over FAT file system as it provides superior features like reliability, security, storage, efficienc…
Shell script to create broker configuration file using current broker Configuration, solely for purpose of backup on Linux. Script may need to be modified depending on OS-installation. Please deploy and verify the script in a test environment.
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…

820 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question