Solved

VPN - A good Place to Start?

Posted on 2001-06-06
2
253 Views
Last Modified: 2010-04-12
I have a SBS 4.5 server (which is NT4 SP6) have approx 25
Win9x clients on our 10BaseT LAN.  We currently use SDSL to access the Internet.  What is a good white paper to use to set up the server and clients to VPN (I would imagine our ISP needs to get involved?)  What do I do?  I have no clue where to begin.  We would like to use TCP/IP via PPTP, pretty basic, no Novel or Unix machines...

Thanks.
0
Comment
Question by:tellurye
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 1

Accepted Solution

by:
mshivdas earned 50 total points
ID: 6166271
http://kubarb.phsx.ukans.edu/~tbird/vpn.html is what I consider to be one of the most complete VPN resources out there.

Specifically http://kubarb.phsx.ukans.edu/~tbird/vpn/vpn-howto.html

More specifically, http://www.firstvpn.com/research/papers6.html

0
 

Author Comment

by:tellurye
ID: 6168082
Perfect!! Just what I needed.  Thanks for the help!!
0

Featured Post

Is your NGFW recommended by NSS Labs?

Ours is! NSS Labs Next Generation Firewall Test gives the WatchGuard Firebox M4600 a "Recommended" rating! Curious where your NGFW landed on the  Security Value Map? See the map and download the full report today!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

One of the Top 10  common Cisco VPN problems are not-matching shared keys. This is an easy one to fix, but not always easy to notice, see the case below. A simple IPsec tunnel between fast Ethernet interfaces of routers SW1 (f1/1) and R1(f0/0). …
Sometimes, you want your microsoft VPN to route all the traffic to the remote network. Usually your employer network. This makes it possible to access all the nodes inside this remote LAN, even if they have no "public DNS" entries. To do so, you wo…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

707 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question