Tru64 HSZ22

I'm trying to set-up a raid array on a HSZ22 linked to 2 es40 alpha boxes running tru64. But I'm getting nowhere I have a command console client, but it wont connect. Can anyone help!!!!

Rik
rtsadAsked:
Who is Participating?
 
mrn060900Connect With a Mentor Commented:
There's your problem, get hold of command console client 2.0 or 2.1 or upgrade the firmware to DIV/Z. But be warned client 2.1 has a bug that doesn't allow you to enable write back cache on the disks. Also if you upgrade the firmware to DIV/Z you'll need win2000 or the like, because the client won't run on win95.

Also make sure you setup a virtual disk via the serail link first or you'll get nowhere fast

Regards Mike.
0
 
mrn060900Commented:
First I'll need to know a little more.

1. What's the revision of firmware on the HSZ22

try using hyperterm or the like to make a serial connection to the controller on the HSZ, use the following settings.

9600-8bit-no parity-1 stop bit.

once connected press the escape key then shift & 7 together, you should now have a menu. Go through the menu options (I can't remember which one off the top of my head) till you find the firmware revision number.


2. What version of command console have you got?

you have to use the correct version with the correct Firmware (A drag I know, but it matters).


Regards Mike.
www.unixonline.co.uk

Oh I nearly forgot, there's a password before the menu screen. You'll need it later.
0
 
rtsadAuthor Commented:
The firmware revision is DIV/X and I'm using command console version 2.5.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.