Go Premium for a chance to win a PS4. Enter to Win

x
?
Solved

disabling password on R3100 Netopia router

Posted on 2001-06-18
4
Medium Priority
?
259 Views
Last Modified: 2008-02-01
There is like a power on password on the router.

The person responsible has left the company.

Even the console requires the user name and password.

Any help appreciated.
0
Comment
Question by:Roxane10
  • 2
  • 2
4 Comments
 
LVL 11

Expert Comment

by:geoffryn
ID: 6204090
You are probably going to have to reset the router to default config.  If it is like all the other Netopias I have ever worked with, you opo the case open and power the thing up.  There should be a small white buttom in side near the LEDs.  Press it and wait for the LED's to stabilize.  Power down and button it back up.  You should be able to get in with a null password at that point.  
0
 

Author Comment

by:Roxane10
ID: 6204143
Thanks for the quick response.

I checked the inside, there is no button on the r3100.

There are some jumpers.

But I assume it has to be something like you suggest.
0
 
LVL 11

Accepted Solution

by:
geoffryn earned 400 total points
ID: 6204165
0
 

Author Comment

by:Roxane10
ID: 6207039
I had looked at the site before, but could not find that.

Great thanks.
0

Featured Post

VIDEO: THE CONCERTO CLOUD FOR HEALTHCARE

Modern healthcare requires a modern cloud. View this brief video to understand how the Concerto Cloud for Healthcare can help your organization.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

New Server 172.16.200.2  was moved from behind Router R2 f0/1 to behind router R1 int f/01 and has now address 172.16.100.2. But we want users still to be able to connected to it by old IP. How to do it ? We can used destination NAT (DNAT).  In DNAT…
In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

877 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question