• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 363
  • Last Modified:

Rio 500 MP3 Player: 128 meg SmartCard not recognized

Installed a 128 meg SmartMedia in a working Rio 500.  The card is not even recognized when the unit is turned on, and the PC interface software doesn't recognize it either.

a) will Rio 500 accept a 128 meg card?

b) does the SmartMedia need to be "initialized" or "formatted" or ...?

c) any other ideas or suggestions ...?

Thanks --

Bob.
0
bowker
Asked:
bowker
1 Solution
 
davids8Commented:
Yes the RIO - WITH THE LATEST FIRMWARE UPGRADE - will work with the 128Meg SMart Media card.
To check Firmware version switch on RIO and go to STATUS.  The latest FIRWARE is 2.15.
If you need to upgrade then go to WWW.riohome.com for the latest frimware.

Yes you do need to format the card.  This can be done in RIOPORT.
 Also get the latest version - www.rioport.com
0
 
bowkerAuthor Commented:
David --

Thank you very much ... worked like a charm!

Bob.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Worried about phishing attacks?

90% of attacks start with a phish. It’s critical that IT admins and MSSPs have the right security in place to protect their end users from these phishing attacks. Check out our latest feature brief for tips and tricks to keep your employees off a hackers line!

Tackle projects and never again get stuck behind a technical roadblock.
Join Now