?
Solved

MS Proxy authentication issues

Posted on 2001-07-22
2
Medium Priority
?
143 Views
Last Modified: 2013-12-23
I believe this is the right area for this, if not, please accept my apologies.

I just inherited a company that is having MS Proxy 2.0 issues.  From what I have been told the machine used to be a standalone server in a workgroup, now it is in a domain.  It is running IIS 4.0, SP6 and the latest IIS security packs.  It is a multi-homed server and it's connection to the Net is through a cable modem.

The problem is this, everyone internally who tries to access the Internet is asked for a username, password, and domain.  If/when this is supplied it repeats this process 3 times and then gives a blank web page with no error message.

I haven't been able to find anything too helpful on MS' web site.  Anyone have any ideas?

Much appreciated.
0
Comment
Question by:PDAGuy
2 Comments
 
LVL 63

Accepted Solution

by:
SysExpert earned 400 total points
ID: 6307047
1) You need to turn on anonymous access.

2) You need to turn off any user authentification.

I would suggest you read the manual on proxy server and trobleshooting and also take a look at

Proxy Server 2 - Install, FAQ
http://support.microsoft.com/support/kb/articles/Q252/5/17.ASP

http://www.microsoft.com/proxy/default.asp

http://www.microsoft.com/proxy/Support/FAQ.asp

http://support.microsoft.com/support/proxy/faq/default.asp


I hope this helps !
0
 

Expert Comment

by:CleanupPing
ID: 9160360
PDAGuy:
This old question needs to be finalized -- accept an answer, split points, or get a refund.  For information on your options, please click here-> http:/help/closing.jsp#1 
EXPERTS:
Post your closing recommendations!  No comment means you don't care.
0

Featured Post

Configuration Guide and Best Practices

Read the guide to learn how to orchestrate Data ONTAP, create application-consistent backups and enable fast recovery from NetApp storage snapshots. Version 9.5 also contains performance and scalability enhancements to meet the needs of the largest enterprise environments.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is in response to a question (http://www.experts-exchange.com/Networking/Network_Management/Network_Analysis/Q_28230497.html) here at Experts Exchange. The Original Poster (OP) requires a utility that will accept a list of IP addresses …
Measuring Server's processing rate with a simple powershell command. The differences in processing rate also was recorded in different use-cases, when a server in free and busy states.
Integration Management Part 2
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…

850 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question