Blue screen during booting

Hi,
  My Win2000 Pro can't boot itself.  It always comes with the blue screen with error message.  I want to use the win2000 CD to boot but the blue screen still exists.  How can I solve this problem???

  I have tried to select every option by pressing 'F8' but blue screens still comes out.

  What's wrong???

Thanks
gorexyAsked:
Who is Participating?
 
bigeekCommented:
You computer has issues.  How long has 2000 been installed?  Have you recently made any hardware or software changes since your last boot?
0
 
gorexyAuthor Commented:
no I didn't install anything new
0
The 14th Annual Expert Award Winners

The results are in! Meet the top members of our 2017 Expert Awards. Congratulations to all who qualified!

 
AjninCommented:
Do you have any repair disk?
0
 
gorexyAuthor Commented:
no..how can I make?
0
 
AjninCommented:
To create a repair disk goto Run, Start, Accessories, System Tools then Backup.

However this needs to be done before you run into problems. This allows you to get your PC back to the way t was when you created the repair disk.

Has Win2000 ever worked on this machine?

If it has you could try booting to the Win2000 setup cd and choose the repair option (even if you don't have a repair disk). Then choose Emergency Repair the Fast Repair.

If it has never worked then it is most likely a hardware issue.

regards
0
 
Kyle SchroederEndpoint EngineerCommented:
Without having the actual STOP error message, its hard to say what's happening, but it sounds like the harddrive with Win2K was cloned from a system with a different motherboard and IDE controller chipset.  You may be able to reinstall.  Go into the BIOS setup and see if you can change the Boot Order to boot first from CD-ROM.  Then save and exit, restart machine with Win2K CD in the CD-ROM drive (assuming IDE, SCSI is a bit more complicated depending on if your SCSI card supports CD boot).

Please post the first line or 2 of the blue screen error you get.

-d
0
 
gorexyAuthor Commented:
no I use the win2000 CD to boot but it can't let me select to reinstall or repair option!  
0
 
stevenlewisCommented:
what does the stop screen say? what are the numbers listed
0
 
gorexyAuthor Commented:
0x00000024 (0x00190256,0xf5c33748,0xf5c333a0,0xbff836ce)
0
 
gorexyAuthor Commented:
YUP this page can help a lots. Thx
0
 
stevenlewisCommented:
gorexy Glad I could help
Steve
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.