Go Premium for a chance to win a PS4. Enter to Win

x
?
Solved

HELP!!!! on a cisco 3500XL

Posted on 2001-09-18
3
Medium Priority
?
222 Views
Last Modified: 2010-04-17
I was busy reloading cisco IOS 12.5 from an image I got from Cisco website.  I think the file got corrupted, because when I did the "reload", it came up with unable to load boot image.

I now cannot boot this thing, at all, except for the basic commands which are available.  Can some please give me step by step instruction on recovering the beast.  It would also help if you could give me the "tar /x tftp" command, as I tried that and I think it didnt work properly. Thanks
0
Comment
Question by:grepster
  • 2
3 Comments
 
LVL 2

Expert Comment

by:bsadlick
ID: 6491764
0
 
LVL 2

Accepted Solution

by:
bsadlick earned 800 total points
ID: 6491775
0
 

Author Comment

by:grepster
ID: 6493012
That link actually sent me to a few other which solved the problem
0

Featured Post

Concerto Cloud for Software Providers & ISVs

Can Concerto Cloud Services help you focus on evolving your application offerings, while delivering the best cloud experience to your customers? From DevOps to revenue models and customer support, the answer is yes!

Learn how Concerto can help you.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

877 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question