Solved

can't reach network from peer to peer connection

Posted on 2002-04-16
4
157 Views
Last Modified: 2010-04-13
Here is the scenario

I have no free hub ports to connect a Pc to the network, so I'm trying to get the network using a second card of a computer attached to the network.

* a pc with 1 nic ip=192.168.1.100 gateway=192.168.1.101
  under Win95     netmask=255.255.255.0
 
* a pc with 2 nics ip1=192.168.0.2 gateway=192.168.0.1
                   ip2=192.168.1.101
                   netmask=255.255.255.0
  under Win2000 configured as router.

192.168.1.100 <-------> 192.168.1.101 crossed cable

I can ping from 192.168.1.100 to 192.168.0.2
but I can't ping from 192.168.1.100 to 192.168.0.1
Any idea???

Thanks in advance....

0
Comment
Question by:cblazque
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
4 Comments
 
LVL 63

Expert Comment

by:SysExpert
ID: 6946564
It's cheaper to buy a cheap $20 4 port hub then to spend time to get the routing working in win2k.

If you really want to try, please post the results of

ipconfig /all and
route print from the win2k machine.

I hope this helps !
0
 

Author Comment

by:cblazque
ID: 6950950
To SysExpert:

Here is the result of route print
===========================================================================
ILista de interfaces
0x1 ........................... MS TCP Loopback interface
0x1000003 ...00 02 a5 0e fd d1 ...... Intel 8255x-based Integrated Fast Eth

0x1000004 ...00 01 02 cc c0 95 ...... 3Com EtherLink PCI
===========================================================================
===========================================================================
Rutas activas:
Destino de red        Máscara de red   Puerta de acceso   Interfaz  Métrica
          0.0.0.0          0.0.0.0      192.168.0.1   192.168.1.101       1
          0.0.0.0          0.0.0.0      192.168.0.1     192.168.0.2       1
          0.0.0.0          0.0.0.0      192.168.0.2   192.168.1.101       1
         10.7.1.0    255.255.255.0      10.7.12.254     192.168.0.2       3
         10.7.2.0    255.255.255.0      10.7.12.254     192.168.0.2       4
         10.7.3.0    255.255.255.0      10.7.12.254     192.168.0.2       4
       10.7.101.0    255.255.255.0      10.7.12.254     192.168.0.2       4
       10.7.231.0    255.255.255.0      10.7.12.254     192.168.0.2       2
        127.0.0.0        255.0.0.0        127.0.0.1       127.0.0.1       1
      192.168.0.0    255.255.255.0      192.168.0.2     192.168.0.2       1
      192.168.0.2  255.255.255.255        127.0.0.1       127.0.0.1       1
    192.168.0.255  255.255.255.255      192.168.0.2     192.168.0.2       1
      192.168.1.0    255.255.255.0    192.168.1.101   192.168.1.101       1
     192.168.1.10  255.255.255.255        127.0.0.1       127.0.0.1       1
    192.168.1.101  255.255.255.255        127.0.0.1       127.0.0.1       1
    192.168.1.255  255.255.255.255    192.168.1.101   192.168.1.101       1
        224.0.0.0        224.0.0.0      192.168.0.2     192.168.0.2       1
        224.0.0.0        224.0.0.0    192.168.1.101   192.168.1.101       1
  255.255.255.255  255.255.255.255      192.168.0.2     192.168.0.2       1
Puerta de enlace predeterminada:       192.168.0.1
===========================================================================
Rutas persistentes:
  ninguno
0
 
LVL 63

Accepted Solution

by:
SysExpert earned 200 total points
ID: 6952330
Remove the gateway addresses for each NIC in Win2K.

If you have IP forwarding enabled, they should automatically forward.

Reboot.

I hope this helps !
0
 

Expert Comment

by:SpideyMod
ID: 8190938
Administrative Action - Force Accepted

SpideyMod
Community Support Moderator @Experts Exchange
0

Featured Post

Get 15 Days FREE Full-Featured Trial

Benefit from a mission critical IT monitoring with Monitis Premium or get it FREE for your entry level monitoring needs.
-Over 200,000 users
-More than 300,000 websites monitored
-Used in 197 countries
-Recommended by 98% of users

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

NTFS file system has been developed by Microsoft that is widely used by Windows NT operating system and its advanced versions. It is the mostly used over FAT file system as it provides superior features like reliability, security, storage, efficienc…
This article is in regards to the Cisco QSFP-4SFP10G-CU1M cables, which are designed to uplink/downlink 40GB ports to 10GB SFP ports. I recently experienced this and found very little configuration documentation on how these are supposed to be confi…
In this video we outline the Physical Segments view of NetCrunch network monitor. By following this brief how-to video, you will be able to learn how NetCrunch visualizes your network, how granular is the information collected, as well as where to f…
Monitoring a network: why having a policy is the best policy? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the enormous benefits of having a policy-based approach when monitoring medium and large networks. Software utilized in this v…

630 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question