Solved

X Windows

Posted on 2002-04-28
1
155 Views
Last Modified: 2010-04-17
Hi,

I'm trying to set a router so that X Windows session can use NAT to connect to a particular server.

I use the lines below in the router config to connect to the internal machine 192.168.1.245.

ip nat inside source static tcp 192.168.1.245 6000 213.177.165.138 3389 extendable
ip nat inside source static udp 192.168.1.245 6000 213.177.165.138 3389 extendable


However, X Windows does not work from external machines.  Is there any other commands that i should be entering in order to get X Windows working?

Thanks


0
Comment
Question by:ossentoo
1 Comment
 
LVL 79

Accepted Solution

by:
lrmoore earned 100 total points
ID: 6974934
try opening udp port 177 for xdmcp
Source port could be TCP 6000 - 6003

0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

It happens many times that access list (ACL) have to be applied to outgoing router interface in order to limit some traffic.This article is about how to test ACL from the router which is not very intuitive for everyone. Below scenario shows simple s…
In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

832 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question