Still celebrating National IT Professionals Day with 3 months of free Premium Membership. Use Code ITDAY17

x
?
Solved

NTLMSSP, WINS, DHCP problem

Posted on 2002-06-17
9
Medium Priority
?
357 Views
Last Modified: 2013-12-28
I have such problem. When I've installed WINS and DHCP on the PDC server it seems that something works bad because neither WINS nor DHCP is starting and the communicates about that are:

event 7001 - the Windows Internet Name Service service  depends on the NT LM Security Support Provider service which failed to start because of the following error: after starting the service hung in a start-pending state.

(Above is the same in DHCP server starting also)

event 7022 - the NT LM Security support provider hung on starting

The computer is IBM Netfinity 5000 with Windows NT 4.0 & SP6a

0
Comment
Question by:sp8ufn
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
9 Comments
 
LVL 2

Accepted Solution

by:
percy_k earned 1000 total points
ID: 7086524
0
 
LVL 1

Author Comment

by:sp8ufn
ID: 7087900
I've done what was advised in the technet article that means took srv.sys with new creation date and time and copied it into \winnt\system32\drivers\ and after the server restart nothing had change the NTLMSSP is again start pending.
0
 
LVL 11

Expert Comment

by:geoffryn
ID: 7089512
It the RPC configuration service installed?
0
Supports up to 4K resolution!

The VS192 2-Port 4K DisplayPort Splitter is perfect for anyone who needs to send one source of DisplayPort high definition video to two or four DisplayPort displays. The VS192 can split and also expand DisplayPort audio/video signal on two or four DisplayPort monitors.

 
LVL 17

Expert Comment

by:mikecr
ID: 7090230
What, if any, third party software do you have on the PDC?
0
 
LVL 1

Author Comment

by:sp8ufn
ID: 7091843
1. I have reinstalled network driver and some other services (it was impossible to remove Server & Workstation in the PDC) of course RPC Configuration service is also installed (Netbios interface as well);

2. There is no third party software on the PDC;

0
 
LVL 17

Expert Comment

by:mikecr
ID: 7092347
Try reapplying the latest service pack and see if this fixes the problem.
0

Featured Post

VIDEO: THE CONCERTO CLOUD FOR HEALTHCARE

Modern healthcare requires a modern cloud. View this brief video to understand how the Concerto Cloud for Healthcare can help your organization.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Windows 10 Creator Update has just been released and I have it working very well on my laptop. Read below for issues, fixes and ideas.
This article shows how to use a free utility called 'Parkdale' to easily test the performance and benchmark any Hard Drive(s) installed in your computer. We also look at RAM Disks and their speed comparisons.
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…
How to fix incompatible JVM issue while installing Eclipse While installing Eclipse in windows, got one error like above and unable to proceed with the installation. This video describes how to successfully install Eclipse. How to solve incompa…

670 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question