Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 290
  • Last Modified:

set ip address on machine

hello experts out there..

 my machine has 2 networks cards.
 but when i issue $ ifconfig -a
 i get;

 lo0:lags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4>
     mtu 8232 index 1 inet 127.0.0.1 netmask ff000000
 hme0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4>
        mtu 1500 index 2
        inet 190.254.31.59 netmask ffffffe0 broadcast
         190.254.31.63 ether 8:0:20:9d:eb:47

 which shown that solaris only detect 1 network card.
 i didn't assign any IP address yet to the second card.
 my question is;

 1) how to detect/configure the second network card
    so that i can assign an IP address to it.

  any help greatly appreciated.

 tq
0
ismahwati
Asked:
ismahwati
  • 2
  • 2
1 Solution
 
billwccCommented:
You have to plumb the interface before it will come up.

It goes something like:

#ifconfig hme1 plumb
#ifconfig hme1 190.254.61.XX netmask 255.255.255.0 \
broadcast 190.254.61.255

See man (1M) ifconfig.

0
 
ismahwatiAuthor Commented:
what is the brodcast there
means ?

tq
0
 
ismahwatiAuthor Commented:
ok it works..
anyway, first i need to create
hostname.hme1 in /etc.

then

#ifconfig hme1 plumb
#ifconfig hme1 190.254.61.XX netmask 255.255.255.0 \
broadcast 190.254.61.255
#ifconfig hme1 up


thanks
0
 
billwccCommented:
yep, and put your broadcast in /etc/netmasks too.
0

Featured Post

Free Tool: SSL Checker

Scans your site and returns information about your SSL implementation and certificate. Helpful for debugging and validating your SSL configuration.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

  • 2
  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now