Solved

urgent!!! ppp error

Posted on 2002-07-17
16
192 Views
Last Modified: 2013-12-15
hi experts, l'm using rehat linux 7.3. i used the minicom to dial into isp, after ihad enter the userid and password, the following words up on screen and stop the connection. why ? its working fine when i tried to dial from "neat". am i setting something wrong or miss ? please help, any help would be appreaciated. thanks.

** Welcome to TMnet (brf-nac02) **

Login: eddieaks
Password:
      Entering PPP Session.
      IP address is 203.106.54.14
      MTU is 1500.

NO CARRIER    
0
Comment
Question by:Explorer060599
16 Comments
 
LVL 1

Expert Comment

by:dkloes
ID: 7159883
Since you are actually connecting to the ISP and entering the user id and password, I would suspect you have a wrong setting.  Possibly in the encryption area.  Be sure you are matching what the ISP is expecting.  Compare "neat" settings to these settings and see if anything is different.
0
 

Author Comment

by:Explorer060599
ID: 7161105
which configuration file involve the encryption ? how can i compare the one over the other ? please...l'm new in setting up dial-up in linux.
0
 
LVL 1

Expert Comment

by:dkloes
ID: 7161782
When setting up a dial-up connection, you must match the PPP settings your ISP should have given you.  Some examples are:

Software compression
Encrypted password
Data encryption
IP header compression

If any of these are incorrect or if you user id or password are incorrect, the could cause the connection hangup (NO CARRIER).  If you are not aware of what these settings should be, contact your ISP to get them.
0
 

Author Comment

by:Explorer060599
ID: 7163718
ok, where should i edit for that configuration in linux ?
0
 
LVL 1

Expert Comment

by:dkloes
ID: 7164572
These are actually part of the PPP setup.  What ppp are you using and how did you configure it.
0
 

Author Comment

by:Explorer060599
ID: 7165279
ok..expert, i will post the ppp options and connect script here once l get back office.
0
 

Author Comment

by:Explorer060599
ID: 7173624
ok, finally got this file. here is some ppp configuration files.

options
-------
lock



options.ttyS1
-------------
proxyarp
debug
defaultroute
modem
crtscts
noauth
0
 
LVL 1

Expert Comment

by:dkloes
ID: 7173950
I suspect the problem is in the noauth area.  You might want to look at this question.  It has some 7.3 info at the end:
http://www.experts-exchange.com/questions/Q_20292675.html

Also, have you tried using chat to call the isp?
0
What Security Threats Are You Missing?

Enhance your security with threat intelligence from the web. Get trending threat insights on hackers, exploits, and suspicious IP addresses delivered to your inbox with our free Cyber Daily.

 

Author Comment

by:Explorer060599
ID: 7176483
yes, i've tried the chat...same error as well....
0
 

Author Comment

by:Explorer060599
ID: 7179442
sir, the link you provided does not have what i want cause that question talking abt dial in server but not dial up isp. i've tried take out the noauth, it's still not working.
0
 
LVL 1

Expert Comment

by:dkloes
ID: 7181839
Here is an excellent PPP tutorial I found that may help with your problem.  You might look at the Logging section.  Your logs may give an indication of what might be causing the problem.  Pass on any log information if you need to continue.

http://axion.physics.ubc.ca/ppp-linux.html
0
 
LVL 1

Expert Comment

by:dkloes
ID: 7197843
Found this tidbit about dropping line connections:

-----
Wrongly configured modem. The first thing the computer does when you ask it to connect via a modem is to send that modem an initialisation string. This is a string of commands that tell the modem how to behave so as to get the optimal performance. Send it the wrong string and life gets frustrating, fast. The string is usually selected when you tell the dialer utility what kind of modem you have. You must select the right configuration file. If there isn't one that exactly matches your modem (the modem should have been supplied with one) you may have to try a few others in the hope of finding something usable.
-----

It could be that minicom is not setting the proper initialization string.  What modem are you using?  Also, I am not familiar with *neat* which you say works properly.  Can you give me some info about *neat*.

If any other experts have any suggestions, please jump in.
0
 

Expert Comment

by:CleanupPing
ID: 9076980
Explorer:
This old question needs to be finalized -- accept an answer, split points, or get a refund.  For information on your options, please click here-> http:/help/closing.jsp#1
EXPERTS:
Post your closing recommendations!  No comment means you don't care.
0
 
LVL 1

Expert Comment

by:drewber
ID: 9220365
This question has been classified abandoned. I will make a recommendation to the moderators on its resolution in a week or two. I appreciate any comments that would help me to make a recommendation.
 

Unless it is clear to me that the question has been answered I will recommend delete. It is possible that a Grade less than A will be given if no expert makes a case for an A grade. It is assumed that any participant not responding to this request is no longer interested in its final disposition.

 
If the user does not know how to close the question, the options are here:
http://www.experts-exchange.com/help/closing.jsp
 
drewber
0
 
LVL 12

Expert Comment

by:paullamhkg
ID: 10389825
No comment has been added lately, so it's time to clean up this TA.
I will leave the following recommendation for this question in the Cleanup topic area:

PAQ - no points refunded

Please leave any comments here within the next four days.
PLEASE DO NOT ACCEPT THIS COMMENT AS AN ANSWER!

paullamhkg
EE Cleanup Volunteer
0
 

Accepted Solution

by:
PashaMod earned 0 total points
ID: 10424874
PAQed - no points refunded (of 100)

PashaMod
Community Support Moderator
0

Featured Post

Complete Microsoft Windows PC® & Mac Backup

Backup and recovery solutions to protect all your PCs & Mac– on-premises or in remote locations. Acronis backs up entire PC or Mac with patented reliable disk imaging technology and you will be able to restore workstations to a new, dissimilar hardware in minutes.

Join & Write a Comment

This is the error message I got (CODE) Error caused by incompatible libmp3lame 3.98-2 with ffmpeg I've googled this error message and found out sometimes it attaches this note "can be treated with downgrade libmp3lame to version 3.97 or 3.98" …
rdate is a Linux command and the network time protocol for immediate date and time setup from another machine. The clocks are synchronized by entering rdate with the -s switch (command without switch just checks the time but does not set anything). …
Learn several ways to interact with files and get file information from the bash shell. ls lists the contents of a directory: Using the -a flag displays hidden files: Using the -l flag formats the output in a long list: The file command gives us mor…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

759 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

21 Experts available now in Live!

Get 1:1 Help Now