Solved

ACC Colorado Rapid AXC 435

Posted on 2002-07-18
3
324 Views
Last Modified: 2008-02-01
UPDATE!!

PROBLEM SOLVED!

REMOVED INTERNAL NETWORK ADDRESS AND IT STARTED WORKING PERFECTLY, ODD BUT IT WORKED!

_______________________________________________________

Hi, I've got the above router connected via leased line to an identical router.

I can ping the remote network from the router (via telnet) however clients of the network, (with the router set as they're default gateway) can not.

The local clients can ping the internal routers IP address, and the external routers IP address. But not the remote external address.

Please see the config files for both routers below.

Many thanks
Chris

LOCAL ROUTER:
SHOW
SET SCRIPT VERSION 9.7.4 (ISDN Software Version 8.0)
SET PROMPT RDF
ADD IP ALIAS ENTRY _B1_DEF_ADDR 126.136.20.188
SET PHYSICAL PORT COMPRESSION J3 OFF 1
SET PHYSICAL PORT COMPRESSION J4 OFF 1
SET PHYSICAL PORT COMPRESSION J5 OFF 1
SET BRIDGE PORT COUNT 8
SET STP MODE OFF
ADD BRIDGE PORT ENTRY PPP 1 J2
SET BRIDGE PORT STATUS 1 ENABLED
ADD BRIDGE PORT ENTRY PPP 2 J3
SET BRIDGE PORT STATUS 2 ENABLED
ADD BRIDGE PORT ENTRY PPP 3 J4
SET BRIDGE PORT STATUS 3 ENABLED
ADD BRIDGE PORT ENTRY ETHERNET 4 J5
SET BRIDGE PORT STATUS 4 ENABLED
ADD BRIDGE PORT ENTRY ETHERNET 5 J6
SET BRIDGE PORT STATUS 5 ENABLED
SET BOOTP MODE OFF
ADD IP NETWORK ENTRY 192.100.10.203 255.255.255.0 B1
ADD IP NETWORK ENTRY 192.168.62.1 255.255.255.0 J6
ADD IP NETWORK ENTRY 192.168.54.8 255.255.255.0 J5
SET LAPB CLOCK MODE J3 SLAVE
SET PHYSICAL PORT SPEED J3 128000
SET PPP COMPRESSION METHOD J3 VENDOR STREAM
SET SR PORT COUNT 8
ADD SR PORT ENTRY PPP 1 J2
SET SR PORT STATE 1 ENABLED
ADD SR PORT ENTRY PPP 3 J4
SET SR PORT STATE 3 ENABLED
ADD SR PORT ENTRY ETHERNET 4 J5
SET SR PORT STATE 4 ENABLED
ADD SR PORT ENTRY ETHERNET 5 J6
ADD SR PORT ENTRY ETHERNET 6 J6
SET SR PORT STATE 6 ENABLED
RESET


REMOTE ROUTER:
SHOW
SET SCRIPT VERSION 9.8.11R1 (ISDN Software Version 8.0)
SET PROMPT Brighton
ADD IP ALIAS ENTRY _B1_DEF_ADDR 126.35.37.93
SET PHYSICAL PORT COMPRESSION J3.1 OFF 1
SET PHYSICAL PORT COMPRESSION J3.2 OFF 1
SET PHYSICAL PORT COMPRESSION J4.1 OFF 1
SET PHYSICAL PORT COMPRESSION J4.2 OFF 1
SET PHYSICAL PORT COMPRESSION J5.1 OFF 1
SET PHYSICAL PORT COMPRESSION J5.2 OFF 1
SET BRIDGE PORT COUNT 8
SET STP MODE OFF
ADD BRIDGE PORT ENTRY ETHERNET 1 J1
SET BRIDGE PORT STATUS 1 ENABLED
ADD BRIDGE PORT ENTRY PPP 2 J3.1
SET BRIDGE PORT STATUS 2 ENABLED
ADD BRIDGE PORT ENTRY PPP 3 J3.2
SET BRIDGE PORT STATUS 3 ENABLED
ADD BRIDGE PORT ENTRY PPP 4 J4.1
SET BRIDGE PORT STATUS 4 ENABLED
ADD BRIDGE PORT ENTRY PPP 5 J4.2
SET BRIDGE PORT STATUS 5 ENABLED
ADD BRIDGE PORT ENTRY PPP 6 J5.1
SET BRIDGE PORT STATUS 6 ENABLED
ADD BRIDGE PORT ENTRY PPP 7 J5.2
SET BRIDGE PORT STATUS 7 ENABLED
SET BOOTP MODE OFF
ADD IP NETWORK ENTRY 192.100.10.201 255.255.255.0 B1
SET LAPB CLOCK MODE J3.1 SLAVE
SET PHYSICAL PORT SPEED J3.1 128000
SET LAPB CLOCK MODE J3.2 SLAVE
SET PHYSICAL PORT SPEED J3.2 128000
SET LAPB CLOCK MODE J4.1 SLAVE
SET PHYSICAL PORT SPEED J4.1 128000
SET LAPB CLOCK MODE J4.2 SLAVE
SET PHYSICAL PORT SPEED J4.2 128000
SET LAPB CLOCK MODE J5.1 SLAVE
SET PHYSICAL PORT SPEED J5.1 128000
SET LAPB CLOCK MODE J5.2 SLAVE
SET PHYSICAL PORT SPEED J5.2 768000
SET PPP COMPRESSION METHOD J3.1 VENDOR STREAM
SET PPP COMPRESSION METHOD J3.2 VENDOR STREAM
SET PPP COMPRESSION METHOD J4.1 VENDOR STREAM
SET PPP COMPRESSION METHOD J4.2 VENDOR STREAM
SET PPP COMPRESSION METHOD J5.1 VENDOR STREAM
SET PPP COMPRESSION METHOD J5.2 VENDOR STREAM
SET SR PORT COUNT 8
ADD SR PORT ENTRY ETHERNET 1 J1
SET SR PORT STATE 1 ENABLED
ADD SR PORT ENTRY PPP 2 J3.1
SET SR PORT STATE 2 ENABLED
ADD SR PORT ENTRY PPP 3 J3.2
SET SR PORT STATE 3 ENABLED
ADD SR PORT ENTRY PPP 4 J4.1
SET SR PORT STATE 4 ENABLED
ADD SR PORT ENTRY PPP 5 J4.2
SET SR PORT STATE 5 ENABLED
ADD SR PORT ENTRY PPP 6 J5.1
SET SR PORT STATE 6 ENABLED
ADD SR PORT ENTRY PPP 7 J5.2
SET SR PORT STATE 7 ENABLED
RESET
0
Comment
Question by:cjcjcj
3 Comments
 
LVL 11

Expert Comment

by:geoffryn
ID: 7162503
There does not appear to be a route back to the local subnet on the remote router or vice versa.
0
 
LVL 79

Expert Comment

by:lrmoore
ID: 7997541
No comment has been added lately, so it's time to clean up this TA.
I will leave a recommendation in the Cleanup topic area for this question:

I recommend: PAQ

If you would like to keep this question open for more expert input, this cleanup effort will get it closer to the top of the list where it will get more visibility for the experts.

if there is any objection or other expert commentary to this recommendation then please post in here within 7 days.
If you feel that your question was not properly addressed, or that none of the comments received were appropriate answers, please post a request in Community support (with a link to this page) to refund your points. http://www.experts-exchange.com/Community_Support/

PLEASE DO NOT ACCEPT THIS COMMENT AS AN ANSWER!

thanks,
lrmoore
EE Cleanup Volunteer
---------------------
0
 

Accepted Solution

by:
SpideyMod earned 0 total points
ID: 8054200
PAQ'd and points refunded.

SpideyMod
Community Support Moderator @Experts Exchange
0

Featured Post

Free Tool: SSL Checker

Scans your site and returns information about your SSL implementation and certificate. Helpful for debugging and validating your SSL configuration.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

While it is possible to put two routes in place with the secondary having a higher metric, this may not always work. In the event of a failure that does not bring down the physical interface on the router the primary route is not removed. There is a…
Tired of waiting for your show or movie to load?  Are buffering issues a constant problem with your internet connection?  Check this article out to see if these simple adjustments are the solution for you.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

827 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question