Solved

Dotmatrix printer's manual

Posted on 2002-07-19
2
274 Views
Last Modified: 2010-08-05
I am looking for the manual of the Ibm Proprinter or the manual of the Epson standard matrix printer.
All that I need is the table with the control codes
(ex: ESC+15, ESC+x0, ecc...)

0
Comment
Question by:caloisoft
2 Comments
 
LVL 23

Accepted Solution

by:
slink9 earned 100 total points
ID: 7164558
This should work for you - http://www.sturec.com/printers.htm
0
 

Author Comment

by:caloisoft
ID: 7164630
Thanks! :-)
That is the table I was looking for.
0

Featured Post

Highfive Gives IT Their Time Back

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Suggested Solutions

Title # Comments Views Activity
Troubleshooting a networked MFP 9 86
outlook, printers, email to print function 6 61
lost printers in remote desktop 8 34
USB Error 20 97
If you use a Brother DCP 130C or similar Brother printer, at some point you might encounter the following problem: after you change the ink cartridge, the printer displays an "ink empty" message. Sometimes you just need to follow the instructions…
How to solve seemingly unsolvable printer issues. Users sometimes run into printing issues where all the normal steps do not seem to work. Well the steps below can show users how to take one extra step beyond the normal steps needed to remove old…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
When you create an app prototype with Adobe XD, you can insert system screens -- sharing or Control Center, for example -- with just a few clicks. This video shows you how. You can take the full course on Experts Exchange at http://bit.ly/XDcourse.

743 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now