?
Solved

Mrtg not Graphing

Posted on 2003-02-20
4
Medium Priority
?
1,044 Views
Last Modified: 2007-12-19
I have ran MrtG against a Cisco 2600 router and it is not graphing the results.

I ran: perl cfgmaker public@172.20.11.1 --global "Workdir: C:\Inetpub\Wwwroot\Mrtg\Bel" --ifref=ifdescr --output bel.cfg

then I edited the bel.cfg

# Created by
# cfgmaker public@172.20.11.1 --global 'Workdir: C:\Inetpub\wwwroot\mrtg\bel' --ifref=ifdescr --output bel.cfg


### Global Config Options

#  for UNIX
# WorkDir: /home/http/mrtg

#  or for NT
# WorkDir: c:\mrtgdata

### Global Defaults

#  to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits


######################################################################
# System: BEL_HeadQ
# Description: Cisco Internetwork Operating System Software
#          IOS (tm) C2600 Software (C2600-I-M), Version 12.0(3)T3,  RELEASE SOFTWARE (fc1)
#          Copyright (c) 1986-1999 by cisco Systems, Inc.
#          Compiled Thu 15-Apr-99 15:41 by kpma
# Contact:
# Location:
######################################################################


### Interface 1 >> Descr: 'FastEthernet0/0' | Name: 'Fa0/0' | Ip: '172.20.11.1' | Eth: '00-01-42-55-77-60' ###

Options[_]: growright, bits

Target[172.20.11.1_1]: 1:public@172.20.11.1:
SetEnv[172.20.11.1_1]: MRTG_INT_IP="172.20.11.1" MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[172.20.11.1_1]: 12500000
Title[172.20.11.1_1]: Traffic Analysis for 1 -- BEL_HeadQ
PageTop[172.20.11.1_1]: <H1>Traffic Analysis for 1 -- BEL_HeadQ</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>12.5 MBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>172.20.11.1 ()</TD></TR>
 </TABLE>


### Interface 2 >> Descr: 'Serial0/0' | Name: 'Se0/0' | Ip: '' | Eth: '' ###

Options[_]: growright, bits

Target[172.20.11.1_2]: 2:public@172.20.11.1:
SetEnv[172.20.11.1_2]: MRTG_INT_IP="" MRTG_INT_DESCR="Serial0/0"
MaxBytes[172.20.11.1_2]: 96000
Title[172.20.11.1_2]: Traffic Analysis for 2 -- BEL_HeadQ
PageTop[172.20.11.1_2]: <H1>Traffic Analysis for 2 -- BEL_HeadQ</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial0/0  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se0/0</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>96.0 kBytes/s</TD></TR>
 </TABLE>


### Interface 3 >> Descr: 'Serial0/1' | Name: 'Se0/1' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * it is administratively DOWN
### * it is operationally DOWN
#
# Target[172.20.11.1_3]: 3:public@172.20.11.1:
# SetEnv[172.20.11.1_3]: MRTG_INT_IP="" MRTG_INT_DESCR="Serial0/1"
# MaxBytes[172.20.11.1_3]: 193000
# Title[172.20.11.1_3]: Traffic Analysis for 3 -- BEL_HeadQ
# PageTop[172.20.11.1_3]: <H1>Traffic Analysis for 3 -- BEL_HeadQ</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>Serial0/1  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>propPointToPointSerial (22)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD>Se0/1</TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>193.0 kBytes/s</TD></TR>
#  </TABLE>


### Interface 4 >> Descr: 'Null0' | Name: 'Nu0' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * it is a cisco Null0 interface
#
# Target[172.20.11.1_4]: 4:public@172.20.11.1:
# SetEnv[172.20.11.1_4]: MRTG_INT_IP="" MRTG_INT_DESCR="Null0"
# MaxBytes[172.20.11.1_4]: 536870911
# Title[172.20.11.1_4]: Traffic Analysis for 4 -- BEL_HeadQ
# PageTop[172.20.11.1_4]: <H1>Traffic Analysis for 4 -- BEL_HeadQ</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>Null0  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>Other (1)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD>Nu0</TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>536.9 MBytes/s</TD></TR>
#  </TABLE>


### Interface 7 >> Descr: 'Serial0/0.1' | Name: 'Se0/0.1' | Ip: '172.20.101.1' | Eth: '' ###

Options[_]: growright, bits

Target[172.20.11.1_7]: 7:public@172.20.11.1:
SetEnv[172.20.11.1_7]: MRTG_INT_IP="172.20.101.1" MRTG_INT_DESCR="Serial0/0.1"
MaxBytes[172.20.11.1_7]: 96000
Title[172.20.11.1_7]: Traffic Analysis for 7 -- BEL_HeadQ
PageTop[172.20.11.1_7]: <H1>Traffic Analysis for 7 -- BEL_HeadQ</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial0/0.1 "Link to BMP" </TD></TR>
   <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se0/0.1</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>96.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>172.20.101.1 ()</TD></TR>
 </TABLE>


### Interface 8 >> Descr: 'Serial0/0.2' | Name: 'Se0/0.2' | Ip: '172.20.102.1' | Eth: '' ###

Options[_]: growright, bits

Target[172.20.11.1_8]: 8:public@172.20.11.1:
SetEnv[172.20.11.1_8]: MRTG_INT_IP="172.20.102.1" MRTG_INT_DESCR="Serial0/0.2"
MaxBytes[172.20.11.1_8]: 96000
Title[172.20.11.1_8]: Traffic Analysis for 8 -- BEL_HeadQ
PageTop[172.20.11.1_8]: <H1>Traffic Analysis for 8 -- BEL_HeadQ</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial0/0.2 "Link to CYO" </TD></TR>
   <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se0/0.2</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>96.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>172.20.102.1 ()</TD></TR>
 </TABLE>


### Interface 9 >> Descr: 'Serial0/0.3' | Name: 'Se0/0.3' | Ip: '172.20.103.1' | Eth: '' ###

Options[_]: growright, bits

Target[172.20.11.1_9]: 9:public@172.20.11.1:
SetEnv[172.20.11.1_9]: MRTG_INT_IP="172.20.103.1" MRTG_INT_DESCR="Serial0/0.3"
MaxBytes[172.20.11.1_9]: 96000
Title[172.20.11.1_9]: Traffic Analysis for 9 -- BEL_HeadQ
PageTop[172.20.11.1_9]: <H1>Traffic Analysis for 9 -- BEL_HeadQ</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial0/0.3 "Link to LDV" </TD></TR>
   <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se0/0.3</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>96.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>172.20.103.1 ()</TD></TR>
 </TABLE>


### Interface 10 >> Descr: 'Serial0/0.4' | Name: 'Se0/0.4' | Ip: '172.20.104.1' | Eth: '' ###

Options[_]: growright, bits

Target[172.20.11.1_10]: 10:public@172.20.11.1:
SetEnv[172.20.11.1_10]: MRTG_INT_IP="172.20.104.1" MRTG_INT_DESCR="Serial0/0.4"
MaxBytes[172.20.11.1_10]: 96000
Title[172.20.11.1_10]: Traffic Analysis for 10 -- BEL_HeadQ
PageTop[172.20.11.1_10]: <H1>Traffic Analysis for 10 -- BEL_HeadQ</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial0/0.4 "Link to SPD" </TD></TR>
   <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se0/0.4</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>96.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>172.20.104.1 ()</TD></TR>
 </TABLE>


### Interface 11 >> Descr: 'Serial0/0.5' | Name: 'Se0/0.5' | Ip: '172.20.105.1' | Eth: '' ###

Options[_]: growright, bits

Target[172.20.11.1_11]: 11:public@172.20.11.1:
SetEnv[172.20.11.1_11]: MRTG_INT_IP="172.20.105.1" MRTG_INT_DESCR="Serial0/0.5"
MaxBytes[172.20.11.1_11]: 96000
Title[172.20.11.1_11]: Traffic Analysis for 11 -- BEL_HeadQ
PageTop[172.20.11.1_11]: <H1>Traffic Analysis for 11 -- BEL_HeadQ</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial0/0.5 "Link to IND" </TD></TR>
   <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se0/0.5</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>96.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>172.20.105.1 ()</TD></TR>
 </TABLE>


### Interface 12 >> Descr: 'Serial0/0.6' | Name: 'Se0/0.6' | Ip: '172.20.106.1' | Eth: '' ###

Options[_]: growright, bits

Target[172.20.11.1_12]: 12:public@172.20.11.1:
SetEnv[172.20.11.1_12]: MRTG_INT_IP="172.20.106.1" MRTG_INT_DESCR="Serial0/0.6"
MaxBytes[172.20.11.1_12]: 96000
Title[172.20.11.1_12]: Traffic Analysis for 12 -- BEL_HeadQ
PageTop[172.20.11.1_12]: <H1>Traffic Analysis for 12 -- BEL_HeadQ</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial0/0.6 "Link to PG" </TD></TR>
   <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se0/0.6</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>96.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>172.20.106.1 ()</TD></TR>
 </TABLE>


### Interface 13 >> Descr: 'Serial0/0.7' | Name: 'Se0/0.7' | Ip: '172.20.107.1' | Eth: '' ###

Options[_]: growright, bits

Target[172.20.11.1_13]: 13:public@172.20.11.1:
SetEnv[172.20.11.1_13]: MRTG_INT_IP="172.20.107.1" MRTG_INT_DESCR="Serial0/0.7"
MaxBytes[172.20.11.1_13]: 96000
Title[172.20.11.1_13]: Traffic Analysis for 13 -- BEL_HeadQ
PageTop[172.20.11.1_13]: <H1>Traffic Analysis for 13 -- BEL_HeadQ</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial0/0.7 "Link to CAYE" </TD></TR>
   <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se0/0.7</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>96.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>172.20.107.1 ()</TD></TR>
 </TABLE>


### Interface 14 >> Descr: 'Serial0/0.8' | Name: 'Se0/0.8' | Ip: '172.20.108.1' | Eth: '' ###

Options[_]: growright, bits

Target[172.20.11.1_14]: 14:public@172.20.11.1:
SetEnv[172.20.11.1_14]: MRTG_INT_IP="172.20.108.1" MRTG_INT_DESCR="Serial0/0.8"
MaxBytes[172.20.11.1_14]: 96000
Title[172.20.11.1_14]: Traffic Analysis for 14 -- BEL_HeadQ
PageTop[172.20.11.1_14]: <H1>Traffic Analysis for 14 -- BEL_HeadQ</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial0/0.8 "Link to DAN" </TD></TR>
   <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se0/0.8</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>96.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>172.20.108.1 ()</TD></TR>
 </TABLE>


### Interface 15 >> Descr: 'Serial0/0.9' | Name: 'Se0/0.9' | Ip: '172.20.109.1' | Eth: '' ###

Options[_]: growright, bits

Target[172.20.11.1_15]: 15:public@172.20.11.1:
SetEnv[172.20.11.1_15]: MRTG_INT_IP="172.20.109.1" MRTG_INT_DESCR="Serial0/0.9"
MaxBytes[172.20.11.1_15]: 96000
Title[172.20.11.1_15]: Traffic Analysis for 15 -- BEL_HeadQ
PageTop[172.20.11.1_15]: <H1>Traffic Analysis for 15 -- BEL_HeadQ</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial0/0.9 "Link to CZL" </TD></TR>
   <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se0/0.9</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>96.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>172.20.109.1 ()</TD></TR>
 </TABLE>


### Interface 16 >> Descr: 'Serial0/0.10' | Name: 'Se0/0.10' | Ip: '172.20.110.1' | Eth: '' ###

Options[_]: growright, bits

Target[172.20.11.1_16]: 16:public@172.20.11.1:
SetEnv[172.20.11.1_16]: MRTG_INT_IP="172.20.110.1" MRTG_INT_DESCR="Serial0/0.10"
MaxBytes[172.20.11.1_16]: 96000
Title[172.20.11.1_16]: Traffic Analysis for 16 -- BEL_HeadQ
PageTop[172.20.11.1_16]: <H1>Traffic Analysis for 16 -- BEL_HeadQ</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial0/0.10 "Link to OW" </TD></TR>
   <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se0/0.10</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>96.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>172.20.110.1 ()</TD></TR>
 </TABLE>


### Interface 17 >> Descr: 'Serial0/0.11' | Name: 'Se0/0.11' | Ip: '172.20.201.1' | Eth: '' ###

Options[_]: growright, bits

Target[172.20.11.1_17]: 17:public@172.20.11.1:
SetEnv[172.20.11.1_17]: MRTG_INT_IP="172.20.201.1" MRTG_INT_DESCR="Serial0/0.11"
MaxBytes[172.20.11.1_17]: 96000
Title[172.20.11.1_17]: Traffic Analysis for 17 -- BEL_HeadQ
PageTop[172.20.11.1_17]: <H1>Traffic Analysis for 17 -- BEL_HeadQ</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial0/0.11 "Link to PLA_Olga's" </TD></TR>
   <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se0/0.11</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>96.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>172.20.201.1 ()</TD></TR>
 </TABLE>


### Interface 18 >> Descr: 'Serial0/0.12' | Name: 'Se0/0.12' | Ip: '172.16.150.2' | Eth: '' ###

Options[_]: growright, bits

Target[172.20.11.1_18]: 18:public@172.20.11.1:
SetEnv[172.20.11.1_18]: MRTG_INT_IP="172.16.150.2" MRTG_INT_DESCR="Serial0/0.12"
MaxBytes[172.20.11.1_18]: 96000
Title[172.20.11.1_18]: Traffic Analysis for 18 -- BEL_HeadQ
PageTop[172.20.11.1_18]: <H1>Traffic Analysis for 18 -- BEL_HeadQ</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial0/0.12 "Link to DTN_Dialup" </TD></TR>
   <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se0/0.12</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>96.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>172.16.150.2 ()</TD></TR>
 </TABLE>


### Interface 19 >> Descr: 'Serial0/0.13' | Name: 'Se0/0.13' | Ip: '172.20.116.1' | Eth: '' ###
### The following interface is commented out because:
### * it is operationally DOWN
#
# Target[172.20.11.1_19]: 19:public@172.20.11.1:
# SetEnv[172.20.11.1_19]: MRTG_INT_IP="172.20.116.1" MRTG_INT_DESCR="Serial0/0.13"
# MaxBytes[172.20.11.1_19]: 96000
# Title[172.20.11.1_19]: Traffic Analysis for 19 -- BEL_HeadQ
# PageTop[172.20.11.1_19]: <H1>Traffic Analysis for 19 -- BEL_HeadQ</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>Serial0/0.13 "Link to DATA_MON" </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD>Se0/0.13</TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>96.0 kBytes/s</TD></TR>
#    <TR><TD>Ip:</TD>         <TD>172.20.116.1 ()</TD></TR>
#  </TABLE>


### Interface 20 >> Descr: 'Serial0/0.14' | Name: 'Se0/0.14' | Ip: '172.20.114.1' | Eth: '' ###

Options[_]: growright, bits

Target[172.20.11.1_20]: 20:public@172.20.11.1:
SetEnv[172.20.11.1_20]: MRTG_INT_IP="172.20.114.1" MRTG_INT_DESCR="Serial0/0.14"
MaxBytes[172.20.11.1_20]: 96000
Title[172.20.11.1_20]: Traffic Analysis for 20 -- BEL_HeadQ
PageTop[172.20.11.1_20]: <H1>Traffic Analysis for 20 -- BEL_HeadQ</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial0/0.14 "Link to Benque" </TD></TR>
   <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se0/0.14</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>96.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>172.20.114.1 ()</TD></TR>
 </TABLE>


### Interface 21 >> Descr: 'Serial0/0.15' | Name: 'Se0/0.15' | Ip: '172.20.220.1' | Eth: '' ###
### The following interface is commented out because:
### * it is operationally DOWN
#
# Target[172.20.11.1_21]: 21:public@172.20.11.1:
# SetEnv[172.20.11.1_21]: MRTG_INT_IP="172.20.220.1" MRTG_INT_DESCR="Serial0/0.15"
# MaxBytes[172.20.11.1_21]: 96000
# Title[172.20.11.1_21]: Traffic Analysis for 21 -- BEL_HeadQ
# PageTop[172.20.11.1_21]: <H1>Traffic Analysis for 21 -- BEL_HeadQ</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>BEL_HeadQ in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>Serial0/0.15 "Link to ~~ " </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD>Se0/0.15</TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>96.0 kBytes/s</TD></TR>
#    <TR><TD>Ip:</TD>         <TD>172.20.220.1 ()</TD></TR>
#  </TABLE>


Workdir: C:\Inetpub\wwwroot\mrtg\bel
Options[_]: growright, bits



I then ran : perl mrtg bel.cfg

I do not get a graph.
I installed firedaemon to turn the mrtg into a service and to run it every 5 mins. Please aid me.

0
Comment
Question by:Protorian
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
4 Comments
 

Author Comment

by:Protorian
ID: 7988964
I just placed the ' Options[_]: growright, bits' where I thought it would be necessary.

0
 
LVL 79

Accepted Solution

by:
lrmoore earned 600 total points
ID: 7989323
You need to specify the workdir:
### Global Config Options

#  for UNIX
# WorkDir: /home/http/mrtg

#  or for NT
# WorkDir: c:\mrtgdata
###EXAMPLE##
D:\MRTG\WORKDIR

### Global Defaults

#  to get bits instead of bytes and graphs growing to the right

##Remove the "#" from the options if you want this set globally:

Options[_]: growright, bits

##
The workdir sets where the files/charts/graphs will be placed. In this example, you would go to D:\MRTG\WORKDIR\ and look for the .htm files.

0
 

Expert Comment

by:cbruce8
ID: 7989338
Have you modified the 2600 snmp stuff from the defaults?
0
 

Expert Comment

by:CleanupPing
ID: 9153454
Protorian:
This old question needs to be finalized -- accept an answer, split points, or get a refund.  For information on your options, please click here-> http:/help/closing.jsp#1 
EXPERTS:
Post your closing recommendations!  No comment means you don't care.
0

Featured Post

Create the perfect environment for any meeting

You might have a modern environment with all sorts of high-tech equipment, but what makes it worthwhile is how you seamlessly bring together the presentation with audio, video and lighting. The ATEN Control System provides integrated control and system automation.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question