Link to home
Start Free TrialLog in
Avatar of bustsagroove
bustsagroove

asked on

WIn2k Adv Server Routing Problem NAT ADSL

I have set up my network exactly like the following diagram
http://www.ireland-online.info/server/

The problem is that my client pc's cant access the internet through my server, I am unfamiliar with 2k server as my main focus is novell netware,

Could someone please exlain what ip addresses and subnets and default gateways i would use on each nic card and how would i go about setting up rras to allow clients to connect to the inet.

I tried enabling NAT and assigning the 10.1.1.2 nic as the public nic connected to the internet but taht never worked, i think i made  mistake with the static route, i am baffled by this as my netware server works just fine in this configuration using a cisco 800 series router on a isdn dial up.

ANy help wouldbe much appreciated.

Avatar of bustsagroove
bustsagroove

ASKER

ANy help much appreciated
ASKER CERTIFIED SOLUTION
Avatar of Bietto
Bietto

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
error in my last post....
on nic 192.168.0.2 remove default gateway !!!!
SOLUTION
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
bustsagroove:
This old question needs to be finalized -- accept an answer, split points, or get a refund.  For information on your options, please click here-> http:/help/closing.jsp#1 
EXPERTS:
Post your closing recommendations!  No comment means you don't care.