?
Solved

No more connections can be made to this remote computer at the DOMAIN LEVEL

Posted on 2003-02-21
4
Medium Priority
?
414 Views
Last Modified: 2008-02-01
I am getting this error at the Domain Level from MY Network Places, when i go to double click on the Domain.


Error Message: (MY domain name) is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permission
"No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept."

But it is occasional for instance, I may get this the third of fourth time I try I access the domain from my Network Places.  I can still map to a share on the Domain Controller to a folder for example \\servername\share\ but not going through My Network Places. Anyone have a clue on this one. A little history on the server, its from Dell new, 5 CAL came with it, I set the domain up in PER SERVER license mode, with an additional 25 CAL purchased.  I tried the recommened stop the licensing service to see if that resolves but nothing and i also made sure that there were enough license, as License Manager in Windows 2000 is only showing 3 licenses that are being used out of the 30.   There are only 5 users in the network, and i was getting this error before i put them onto the domain. As a test i changed the license mode to PER SEAT but after a few days i was getting this same error again. Help please because this is not as straight forward as i am thinking as far as a resloution. I saw some other posts on some other websites for the similar error but no one seems to have a clue on this one. I am even getting this error logged in as the Domain Administrator not from the server but from a workstation on the network.  I reached into Event Viewer to find hope and noticed this same error over  and over do you guys think it has any relation. Error: w32time Event ID 62 The Windows Time Service was not able to find a Domain Controller. A time and date update was not possible.  This network is not connected to the internet so i can not do the recommended point to a time server at  Berkley or time server on the internet.  I hope i gave you guys enough info to go on.

SOS
SOS
SOS

0
Comment
Question by:lgr
3 Comments
 

Accepted Solution

by:
pub earned 80 total points
ID: 8005433
Try to reboot the server and see if problem still exists. Problem may be inbound connections limit in Windows. Check out Microsoft Knowledge Base Article - Q122920.

0
 

Author Comment

by:lgr
ID: 8005754
That raises an interesting point. Is there a reg edit to manually edit and  increase the maximum logged on users and maximum open files per session.
0
 
LVL 5

Expert Comment

by:juliancrawford
ID: 9871573
No comment has been added lately, so it's time to clean up this TA.            
I will leave a recommendation in the Cleanup topic area that this question is:            
            
Answered by: pub            
      

Please leave any comments here within the next seven days.            

PLEASE DO NOT ACCEPT THIS COMMENT AS AN ANSWER!            

JulianCrawford            
EE Cleanup Volunteer
0

Featured Post

Hire Technology Freelancers with Gigs

Work with freelancers specializing in everything from database administration to programming, who have proven themselves as experts in their field. Hire the best, collaborate easily, pay securely, and get projects done right.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Nslookup is a command line driven utility supplied as part of most Windows operating systems that can reveal information related to domain names and the Internet Protocol (IP) addresses associated with them. In simple terms, it is a tool that can …
Enterprise networks where VoIP phones have been deployed frequently use port configurations that allow both a computer and an IP phone to be plugged into the same switch port but use different VLANs. On Cisco equipment I'm referring to the "native V…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
SQL Database Recovery Software repairs the MDF & NDF Files, corrupted due to hardware related issues or software related errors. Provides preview of recovered database objects and allows saving in either MSSQL, CSV, HTML or XLS format. Ensures recov…

615 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question