?
Solved

Block Certain Client Login (special)

Posted on 2003-02-28
4
Medium Priority
?
175 Views
Last Modified: 2010-04-11
I admin a Ethernet.

Windows 2000 Server Named: Srv  IP:130.136.0.1; 131.137.0.1
There are two Clients:
Client A (named CA): IP:130.136.0.2
Client B (named CB): IP:131.137.0.2
Both CA & CB are running Windows98.

Now, here comes the problem:
Srv has an account (named stu1) which can be use on CA or CB to login Srv. Now, I want stu1 can only be used on CA, not CB.
In the normal solution, I can limit stu1 to be used on CA only. But in this case, users might change the name of Client B to CA or change CB's IP to 130.136.0.2.

As far as I know,I could not solve the problem in Windows2000 server. Are there any solutions(using Windows 2000 and some Firewall) available to solve the problem?

Thanks for your help!

================================
Dick (CHN)
0
Comment
Question by:strato121
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
4 Comments
 
LVL 13

Accepted Solution

by:
rhinoceros earned 200 total points
ID: 8046022
As I understood, you want to prevent the user change something in Windows 98 ?

Because Windows 2000 Group Policy is not supported Windows 98, now you can download the software called "Power Toys" (Tweak UI), which can restrict the user to edit somehting like as "Name of PC" (Block the Control Panel), "IP" (Block Network neighbourhood) etc.


More Info:
http://download.com.com/3000-2341-2830963.html?tag=lst-0-1

http://www.microsoft.com/ntworkstation/downloads/powertoys/networking/nttweakui.asp?SD=GN&LN=zh-tw&gssnb=1


I hope it can help
0
 

Assisted Solution

by:Simonv
Simonv earned 200 total points
ID: 8051107
you caould use poedit that comes with windows 98 take alook at the folowing:

http://www.zisman.ca/poledit/

I'am thinking you only have the two computers but this is not probably the case. Poledit can be implemented over a network for multiple users saving time having to make changes on every client on the network. Tkae a look at the following:

http://www.wown.com/j_helmig/poledits.htm

Hope this helps

;o)
0
 

Expert Comment

by:CleanupPing
ID: 9153326
strato121:
This old question needs to be finalized -- accept an answer, split points, or get a refund.  For information on your options, please click here-> http:/help/closing.jsp#1 
EXPERTS:
Post your closing recommendations!  No comment means you don't care.
0

Featured Post

Enroll in August's Course of the Month

August's CompTIA IT Fundamentals course includes 19 hours of basic computer principle modules and prepares you for the certification exam. It's free for Premium Members, Team Accounts, and Qualified Experts!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
This article explains the fundamentals of industrial networking which ultimately is the backbone network which is providing communications for process devices like robots and other not so interesting stuff.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Monitoring a network: how to monitor network services and why? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the philosophy behind service monitoring and why a handshake validation is critical in network monitoring. Software utilized …
Suggested Courses

801 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question