?
Solved

Setting up a 1700 cisco with a backup ddr pstn line

Posted on 2003-03-02
5
Medium Priority
?
311 Views
Last Modified: 2012-05-04
The senario is as follow
1720 Cisco Router
E0 is the lan
E1 is the Wan link
S0 is the serial interface for the 56k modem.

I want to dial the ISP number and logon using username and password ppp. DHCP would be assigned by the ISP. (Lets call it AOL account)(Not really but for this case)

Here is where i am up to. I know i am missing a heap of stuff.

username abcde password defgh

interface serial0
ip address dhcp
encapsulation ppp
dialer idle-timeout 170
dialer map ip 1.1.1.1 name abcde broadcast 9999999
dialer hold-queue 10
dialer-group 1
ppp authentication chap

dialer-list 1 protocol ip permit

Any ideas?
0
Comment
Question by:grayson1963
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
5 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 800 total points
ID: 8053249
Is this an async/analog 56k external modem, or a syncronous?

If it is async, consider using the aux port instead of the serial interface.

Some helpful links:
Using async modem on serial interface
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080094555.shtml

Concept is the same as here, using aux port dialout
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080093d2b.shtml
0
 

Author Comment

by:grayson1963
ID: 8053880
Thanks i was just going to set up a us robotics 56k external modem to it. I will try what the links are saying. Thanks
0
 
LVL 79

Expert Comment

by:lrmoore
ID: 8442625
You can use the instructions here to close out this Question:

http://www.apollois.com/EE/Help/Closing_Questions.htm


0
 
LVL 79

Expert Comment

by:lrmoore
ID: 8725619
grayson1963,
No comment has been added lately (44 days), so it's time to clean up this TA.
I will leave a recommendation in the Cleanup topic area for this question:

RECOMMENDATION: Award points to lrmoore

Please leave any comments here within 7 days.

PLEASE DO NOT ACCEPT THIS COMMENT AS AN ANSWER!

Thanks,

lrmoore
EE Cleanup Volunteer
---------------------
If you feel that your question was not properly addressed, or that none of the comments received were appropriate answers,
please post comments here where a Moderator will see it.
0

Featured Post

Want to be a Web Developer? Get Certified Today!

Enroll in the Certified Web Development Professional course package to learn HTML, Javascript, and PHP. Build a solid foundation to work toward your dream job!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
New Server 172.16.200.2  was moved from behind Router R2 f0/1 to behind router R1 int f/01 and has now address 172.16.100.2. But we want users still to be able to connected to it by old IP. How to do it ? We can used destination NAT (DNAT).  In DNAT…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses

801 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question