Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
?
Solved

Setting up internet on a cisco 2611 router

Posted on 2003-03-06
4
Medium Priority
?
311 Views
Last Modified: 2013-11-29
Hi i need to know how i can setup my cable internet on a 2611 router. The router has 2 T-1 WICS and Dual Ethernet.
I am very familiar with most commands just need a boost on where to start.

Thanks

              -Leo
0
Comment
Question by:Leo Alexander
  • 2
  • 2
4 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 400 total points
ID: 8085774
just setup your E0/0 port for the Internet side. If you can't use the 'ip address dhcp' command, you'll need to upgrade your ios
!
interface eth 0/0
 ip address dhcp
 ip nat outside
 no shut
!
interface eth 0/1
 ip address 192.168.100.1 255.255.255.0
 ip nat inside
!
ip nat inside source list 1 interface ethernet0/0 overload
!
access-list 1 permit 192.168.100.0 0.255.255.255
!

If you need to clone the MAC address from your first installation, you can use another interface command on e0/0 to set the mac address to whatever you need it to be.

Get it working, then you'll want to lock it down with some basic good security.

0
 
LVL 3

Author Comment

by:Leo Alexander
ID: 8085810
Thanks! I'll try that right now.
0
 
LVL 3

Author Comment

by:Leo Alexander
ID: 8085948
Great , it worked! Thanks alot... damn cisco classes :/
0
 
LVL 79

Expert Comment

by:lrmoore
ID: 8086030
Here's a good reference for locking down security on the router:
http://nsa1.www.conxion.com/
Look for the Cisco Router guides.

Cheers!
0

Featured Post

Managing Security & Risk at the Speed of Business

Gartner Research VP, Neil McDonald & AlgoSec CTO, Prof. Avishai Wool, discuss the business-driven approach to automated security policy management, its benefits and how to align security policy management with business processes to address today's security challenges.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Originally, this post was published on Monitis Blog, you can check it here . It goes without saying that technology has transformed society and the very nature of how we live, work, and communicate in ways that would’ve been incomprehensible 5 ye…
In this article I will be showing you how to subnet the easiest way possible for IPv4 (Internet Protocol version 4). This article does not cover IPv6. Keep in mind that subnetting requires lots of practice and time.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
When cloud platforms entered the scene, users and companies jumped on board to take advantage of the many benefits, like the ability to work and connect with company information from various locations. What many didn't foresee was the increased risk…

569 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question