• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 249
  • Last Modified:

Setting IP Address for HPLJ4

I want to set a specific IP address for an HPLJ4 at a remote location. I am certain I have done this before (non-DHCP) but am not finding anywhere to put the IPAddress.

Please advise.
0
tdantona
Asked:
tdantona
  • 3
1 Solution
 
GtristCommented:
I am writing this from memory, as I don't have a HP4 in front of me.
Take the printer off line and then press the menu button until you see the MIO menu. Go into it and item through it until you see tcp/ip. Make sure that the protocol is enabled and then configure it. Make sure that bootp is turned off (dhcp). Go through the tcp/ip menus to add your static ip address. Make sure to select enter after you make each setting change to put an asterisk next to the selection or it won't hold.
0
 
GtristCommented:
Let me know if you need further assistance.
0
 
GtristCommented:
One more suggestion. Print out a test page when you are done to ensure that you have the correct IP address, subnet mask, etc... entered.
0
 
tdantonaAuthor Commented:
Close enough, thanks.
0

Featured Post

Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

  • 3
Tackle projects and never again get stuck behind a technical roadblock.
Join Now