?
Solved

How to Make a Boot CD

Posted on 2003-03-21
2
Medium Priority
?
331 Views
Last Modified: 2010-04-13
I would like to know how to make a bootable CD, similar to the bootable floppy disks I'm used to.
I've got a laptop with NO FDD, and I would need to boot on a floppy in order to upgrade the BIOS.  BUT, since I've NO floppy, I've decided to try to make a bootable CD, but it did not work.  (I've copied all files WITH their attribute from a bootable floppy to a CD.)
What is the special little thing that says to a computer if a CD is bootable or not?

Thanks for your help!
0
Comment
Question by:Sylvania
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 44

Accepted Solution

by:
CrazyOne earned 300 total points
ID: 8182064
0
 

Expert Comment

by:Tomilou
ID: 8182535
Don't limit yourself to a floppy: Create an emergency repair CD
Sep 25, 2002 | Brien M. Posey MCSE | E-Mail



Rating: 4.4 / 5 | Rate this article
Discussions: 37 Post(s) | 0 NEW | View posts  


Although traditional floppy emergency repair disks (ERDs or boot disks) can be a lifesaver when it comes to troubleshooting an OS crash, they suffer one significant drawback. They are limited to only 1.44 MB of spaceand the boot files (Io.sys, Msdos.sys, and Command.com) consume a sizable amount of this space. However, you can create a bootable CD from a floppy disk that functions very similarly to a boot floppy, with greatly expanded space available for drivers, utilities, and anything else you might need.

The advantages of CD over floppy
There are three advantages that a bootable CD has over a bootable floppy. First, a CD can hold a lot more data, so you can include repair utilities that just wont fit on a floppy. Second, CDs tend to be more durable than floppies. You dont have to worry about a CD accidentally getting erased or mangled by a hungry drive head. Finally, CDs are virtually virus proof; assuming that you create the CD on CD-R media and the system that you use to create the CD is clean. And theres no danger of accidentally infecting the CD with a virus from the PC that youre trying to fix.

--------------------------------------------------------------------------------
Start with a floppy
For the process I describe in this article, you'll need a floppy boot disk. Although you can create an emergency repair CD without first using a floppy, the process is much more difficult. And if you create a floppy first, you can test that disk to make sure it works and meets your needs before investing the time to burn a CD. Before you begin creating your bootable CD, I highly recommend you read my previous article on creating the perfect floppy emergency repair boot disk.
--------------------------------------------------------------------------------

Creating the boot CD
For the bootable CD creation techniques outlined in this article, Ill be using Easy CD Creator 5.0 Platinum from Roxio, which comes bundled with many CD-R/RW drives (Figure A). You can apply the general principal of these specific techniques to any CD-burning utility that allows you to create a bootable CD, such as Ahead Software's Nero Burning ROM.

Begin by launching Easy CD Creator and selecting the Make A Data CD option followed by the Data CD Project option. Youll then see the main Easy CD Creator screen. Select New | Bootable CD from the File menu. Next, youll see a dialog box asking you for information about your bootable CD, including its type. The type options are Floppy Disk Emulation (1.44 MB), Floppy Disk Emulation (2.88 MB), and Hard Disk Emulation. For this particular project, select Floppy Disk Emulation; otherwise, Roxio will copy the boot files from your hard disk. I also recommend using Roxio's default settings for the Load Segment and Sector Count options.

The bottom section of the dialog box asks if you want to generate an image from a floppy disk or if youd rather use an existing image file. At this point, insert your boot disk into the computer's floppy drive and click OK. Easy CD Creator will read the floppy's contents and display them in the project workspace. Regardless of how many files are on your boot disk, youll only see two files appear in the workspace, Bootcat.bin and Bootimg.bin, because these files represent an image file rather than the individual files contained within the image.

You can now drag-and-drop any files or folders that you want from the hard disk to the CD project workspace. This is when you'll want to select the utilities to place on your bootable CD. I suggest including some data recovery utilities, disk editors, and antivirus programs. Just remember that you can include any utility you want, but youll only be able to run those utilities that you can operate from a command line.

Now you're ready to create your CD. Make sure a blank CD is in the drive and then click the Record button. Finally, verify the recording speed and the drive letter and click the Start Recording button.

Using the CD
The procedure for using the CD will differ from computer to computer. On some systems, youll have to modify the CMOS before the system configuration before the system will boot from CD. On other systems, simply place the bootable CD into the drive and power up the system. Still other systems will detect a bootable CD in the drive but will require you to press a key to boot from the CD rather than from the hard disk.

If youve created the boot CD using the image from the bootable floppy disk that I described in my previous article, you first should see the boot menu asking you to select a CD-ROM drive type. At first, this might sound really strange. After all, why tell the system what type of drive is in use when the system apparently already knows? Remember that just because the system booted from CD doesnt mean the operating system knows what type of CD-ROM drive is in use. It only means that the systems BIOS knows about the drive. If you want the CD-ROM drive to be accessible through the command prompt, you must still load the necessary drivers.

After selecting the CD-ROM drive from the list, the boot disk will load the drivers and detect the drive. You will then be taken to a command line. All CD-ROM drives will be accessible by drive letter, as will any FAT16 or FAT32 partitions.
0

Featured Post

On Demand Webinar: Networking for the Cloud Era

Ready to improve network connectivity? Watch this webinar to learn how SD-WANs and a one-click instant connect tool can boost provisions, deployment, and management of your cloud connection.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

NTFS file system has been developed by Microsoft that is widely used by Windows NT operating system and its advanced versions. It is the mostly used over FAT file system as it provides superior features like reliability, security, storage, efficienc…
In this modest contribution, I want to share with the IT community (especially system administrators, IT Support Engineers and IT Help Desks) about Windows crashes/hangs and how to deal with these particular problems.
If you’ve ever visited a web page and noticed a cool font that you really liked the look of, but couldn’t figure out which font it was so that you could use it for your own work, then this video is for you! In this Micro Tutorial, you'll learn yo…
In this video, Percona Solution Engineer Rick Golba discuss how (and why) you implement high availability in a database environment. To discuss how Percona Consulting can help with your design and architecture needs for your database and infrastr…
Suggested Courses
Course of the Month8 days, 14 hours left to enroll

765 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question