asked on

ISDN configuration problem

Hi,
I have a Cisco Access Server 3640 , I have a problem in configuring the ISDN lines on it, the problem I have that is there is no authintication takes place when a user tries to logon to the system, the Access Server permit the user to logon without authentication, while the users who use the ordinary modem (not ISDN) logs after authentication process.

Any help on this.

thanks

Amjad

Les Moore

Do you have AAA setup for ppp? What are you using for authentication? Local database? Radius? Tacacs?
Can you post your config? Be sure to change actual ip addresses/passwords, etc.

rburden

What kind of devices are the ISDN users connecting to the 3640 with?

amjad

ASKER

Hi,
Thanks for your Reply, well actually I solved the problem, the problem was that there is no ppp configuration for the ISDN, that was the problem. I added the ppp configuration and it worked well.

Amjad

Les Moore

You can use the instructions here to close out this Question:

http://www.apollois.com/EE/Help/Closing_Questions.htm

SpideyMod

amjad,
I am happy you have found an answer to your question here on your own.

You have been provided with 2 sets of instructions on how to close your open questions. You have 72 hours to perform the steps necessary to close this question. After that point, I am obligated to turn your account over to site administration for review.

SpideyMod
Community Support Moderator @Experts Exchange

ASKER CERTIFIED SOLUTION

SpideyMod

membership

This solution is only available to members.

To access this solution, you must be a member of Experts Exchange.

Start Free Trial