Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
?
Solved

Multi Router Traffic Grapher (MRTG) Config problem.. Need expert

Posted on 2003-03-30
3
Medium Priority
?
676 Views
Last Modified: 2009-12-16
I want to get rid of the B/s pert of the legend, as I am graphing CPU Usage on my Cisco router.
I have the MIB for 1 minute and 5 minute averages, and I am getting the right data, but I cant get rid of the "B/s" (bytes per sec, I assume)

It looks like

 Average 1 minute load  1.0 B/s (1.0%)   Current 1 minute load  3.0 B/s (3.0%)  
 Average 5 minute load  1.0 B/s (1.0%)   Current 5 minute load  3.0 B/s (3.0%)  

I just want the output to look like

 Average 1 minute load  1.0%  Current 1 minute load  3.0%  
 Average 5 minute load  1.0%  Current 5 minute load  3.0%  

If I have to, I will get rid of the legend, but the optimum solution would be to fix it.

Here is the config file:

runasdaemon:yes
interval:5
Options[_]: growright, gauge
Target[fw2-cpu]: 1.3.6.1.4.1.9.2.1.57.0&1.3.6.1.4.1.9.2.1.58.0:community@myrouter.nwtraders.msft::::2
YLegend[fw2-cpu]: CPU Usage
Legend1[fw2-cpu]: 1 minute load
Legend2[fw2-cpu]: 5 minute load
LegendI[fw2-cpu]: 1 minute load
LegendO[fw2-cpu]: 5 minute load
MaxBytes[fw2-cpu]: 100
Title[fw2-cpu]: CPU Analysis for FW2
PageTop[fw2-cpu]: <H1> Processor Usage Analysis for FW2 </H1>
WorkDir: e:\web\net\test
0
Comment
Question by:MCSE-2002
  • 2
3 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 200 total points
ID: 8234531
0
 

Expert Comment

by:CleanupPing
ID: 9152795
MCSE-2002:
This old question needs to be finalized -- accept an answer, split points, or get a refund.  For information on your options, please click here-> http:/help/closing.jsp#1 
EXPERTS:
Post your closing recommendations!  No comment means you don't care.
0
 
LVL 79

Expert Comment

by:lrmoore
ID: 9161826
Question asked and answered by:
lrmoore
0

Featured Post

Evaluating UTMs? Here's what you need to know!

Evaluating a UTM appliance and vendor can prove to be an overwhelming exercise.  How can you make sure that you're getting the security that your organization needs without breaking the bank? Check out our UTM Buyer's Guide for more information on what you should be looking for!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
During and after that shift to cloud, one area that still poses a struggle for many organizations is what to do with their department file shares.
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…

571 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question